!
error Braemar
Error Code RESET AND FAULT CODE NUMBERS
The system has detected a fault. The SCC will flash RESET, and display a fault code number where the time is normally displayed.
? What Causes This
System software detects an issue that requires servicing or maintenance.
✓ How to Fix It
- Press and hold RESET to acknowledge the fault and turn off the SCC and heater.
- Press RESET again to send a reset signal to the heater and start it up.
- If the heater fails, wait 10 minutes then try again.
- Contact Braemar Service or installer if still not working.
Source: page 11 of the official manual
From the manual
This error code appears in:
Braemar Spectrolink