Cooktops Error Codes

A fault in the electronic system has occurred.

The pan is not ferromagnetic or the diameter of the pan is too small for the element.

The main switch has been activated continuously for more than 5 seconds, triggering a fault condition.

The touch control zone is wet, very dirty, food has boiled over, or an object is lying on top of the touch control zone.

The element is too hot and has turned off automatically.

The touch control zone is too hot.

The element was in continuous use for too long. The automatic time limitation has been activated.

The element is too hot. The SpeedBoost function operates the element with the highest possible power and may turn off to protect the cooktop from overheating during long cooking times.

No cookware detected — the cooktop cannot sense induction-compatible cookware on the cooking zone.

Overheating — the cooktop internal temperature has exceeded safe operating limits.

Voltage issue — the power supply voltage is outside the acceptable operating range.

Overheating detected — temperature exceeds 500°F.

Overheating detected — internal temperature too high.

Audible alert for any detected faults or errors.