Routers Error Codes
28 error codes across 1 brands. Find your code, what it means, and how to fix it.
Netgear
28 codesThe firmware is upgrading, or the Reset button was pressed.
The Ethernet port is sending or receiving traffic at 100 Mbps or 10 Mbps.
The firmware is corrupted.
The port is sending or receiving traffic.
The router is sending or receiving WiFi traffic on 2.4 GHz.
The router is sending or receiving WiFi traffic on 5 GHz.
A USB device is plugged in and is trying to connect, or a file is transferring to or from the USB device.
A USB device is plugged in and is trying to connect, or a file is transferring to or from the USB device.
The Ethernet port is sending or receiving traffic at 1 Gbps.
Power is not supplied to the router.
No Ethernet cable is connected between the router and the modem.
The 2.4 GHz WiFi radio is off.
The 5 GHz WiFi radio is off.
No USB device is connected to port 1, or Safely Remove Hardware was clicked.
No USB device is connected to port 2, or Safely Remove Hardware was clicked.
No device is connected to this Ethernet port.
The router is starting up.
The router has detected an Ethernet cable connection to the modem.
The router detected a 100 Mbps or 10 Mbps link with a powered-on device.
The router is ready and operational.
The Internet connection is ready.
The 2.4 GHz WiFi radio is operating.
The 5 GHz WiFi radio is operating.
A USB device is connected to USB port 1 and is ready.
A USB device is connected to USB port 2 and is ready.
The router detected a 1 Gbps link with a powered-on device on Ethernet port.
The WPS process is in progress.
A WPS-enabled device has successfully connected to the router's WiFi network.