Vapes Error Codes

Low resistance detected (typically indicating a short circuit or low resistance coil).

No Load/High Resistance — The pod resistance is too high or the pod is not properly connected to the device.

No load or high resistance detected. The device will stop working.

Low voltage or over-discharging detected — the battery level is critically low.

Battery level indicator showing medium charge (30% to 70%).

No load or high resistance detected — the atomizer/pod connection is poor or the resistance is too high.

Overtime/draw time limit exceeded (8 seconds) — device stops working.

Excessive usage time detected — automatic power-off to prevent overheating or damage.

Overcharging condition detected - green indicator stays on.

Over Charging — The device is detecting a charging circuit fault or the battery is fully charged but the charger remains connected.

Over-charging detected. The device will stop charging.

Battery level indicator showing high charge (70% to 100%).

Overcharging condition detected — stopping power flow to protect battery integrity.

Over-discharging detected – power levels too low.

Battery level indicator showing current charge while the device is active, normal operation.

Device overheating - indicating internal temperature too high.

Overtime (8 seconds) — The device has been activated for longer than the 8-second safety cutoff limit and has automatically shut down.

Overcharging detected - battery cannot safely receive additional charge.

Overtime (8 seconds exceeded) detected. The device will stop working and the LED will flash 5 times in the color corresponding to the current battery level.

Over-charging detected — battery continues to charge beyond the normal level.

Battery level indicator showing remaining charge after use and insertion, normal operation.

Over-discharging or low voltage condition detected, leading to emergency shutdown to preserve battery longevity.

Low resistance or short-circuit detected — the internal resistance of the device is below safe operating limits.

No load detected or high resistance condition.

Low voltage or overdischarge condition detected.

High temperature protection activated — internal temperature has exceeded safe operating limits.

Puff duration timeout — a single puff has exceeded the 8-second maximum duration.

Low Voltage/Over Discharging — The battery voltage has dropped below the minimum safe operating threshold.

Low Resistance/Short-circuit/High Temperature — The device has detected a resistance below safe levels, a short circuit, or internal temperature exceeding safe limits.

Battery level indicator showing low charge (0% to 30%).

Overheating detected - internal temperature too high.

Exceeded operating time limits.

No atomizer detected or the atomizer resistance is higher than 2Ω.

Low battery condition — voltage is lower than 2.85V while vaping, output automatically cuts off.

Open circuit or high resistance detected — output is cut off and an error code of '0.0' for resistance value appears.

Vaping too long (over 10 seconds) — output cut off.

Short circuit detected — actual resistance value is displayed and output cut off.

Check atomizer — no atomizer or pod is detected by the device.

Short circuit detected — the atomizer/coil has a short circuit fault and will not produce output.

Low battery warning — battery voltage is below 3.3V before use or lower than 2.85V during use.

Over 10 seconds continuous vaping — user has exceeded the maximum continuous puff duration and output is cut off.

Over-temperature warning — internal board temperature is too high and the device will shut down.

Battery voltage is critically low. LED indicator flashes red 3 times and output automatically cuts off.

Open circuit detected — coil resistance is too high or circuit connection is broken. LED indicator flashes purple 3 times, resistance displays '0.0', and no power output occurs.

Continuous puffing timeout — user has been vaping for more than 10 seconds continuously. LED indicator flashes purple 8 times and output automatically cuts off.

Short circuit detected — internal electrical fault. LED indicator flashes red 8 times, resistance displays actual value, and no power output occurs.

Vape temperature over 85°C — device stops working as a safety measure.

No atomizer detected — device cannot detect the pod/atomizer.

Internal temperature has exceeded safe operating limits and the device has stopped working.

The fire button is locked and cannot be used to vape.

Battery voltage has dropped below 3.2V and the device has stopped working.

The pod/cartridge is not properly connected or installed in the device.

Low battery indicator — device stops working when battery is critically low.

Short circuit detected — device stops working as a safety measure.

High temperature detected — device stops working as a safety measure.

A short circuit has been detected in the heating wire and the device has stopped working.

Vaping exceeded the 8-second safety limit and the device has stopped working.

Overcharge protection activated — battery is fully charged and charging has ceased.

Device has shut down due to overheating — internal safety mechanism has disabled operation.

Low battery indicator — battery voltage is below 3.3V and device needs charging.

Overheat protection activated — internal temperature has exceeded safe operating limits.

Short circuit protection activated — a short circuit has been detected in the device.

Vaping over-time protection activated — continuous draw has exceeded 10 seconds.

Fully charged indicator — battery has reached 100% charge capacity.

Low voltage protection or low resistance protection activated.

Device in use or charging — normal operating status indicator.

Anti-burn function is activated — the device is protecting against overheating.

Circuit protection notification — general error condition detected.

Circuit protection notification — internal circuit protection has been triggered.

No atomizer detected — atomizer head not properly seated or missing.

Atomizer protection activated — power button held down for too long during vaping.

Short circuit protection activated — atomizer short-circuited.

Auto shut-off activated — device has been inhaling for 10 continuous seconds and has automatically turned off.