Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
16 totalWhat type of cable is needed to charge the Inpods 12 case?
A USB to Micro USB cable is required to charge the hard charging case. The charging source must have a USB output of 5V DC 1/1.5A. (Page 1)
What should I do before using the Inpods 12 for the very first time?
Before using the earbuds for the first time, you should charge them fully using the supplied cable. Also ensure that the device you want to pair them with is turned on and Bluetooth is activated. (Page 1)
Can I use just one earbud at a time with the Inpods 12?
Yes, the earbuds can be used individually or as a pair. Simply use whichever configuration is most convenient for you. (Page 1)
What should I do if audio is only coming from one earbud?
If audio is only coming from one earbud (usually the right one), it is recommended to repeat the earbud pairing procedure. Continue repeating the process until audio is present in both earbuds. (Page 1)
How should I properly insert the Inpods 12 earbuds in my ears?
Insert the earbud into your ear and rotate it until you reach the ideal angle that is most comfortable for the shape of your ear. Proper positioning ensures the best fit and audio experience. (Page 1)
How do I know when my Inpods 12 are fully charged?
When the LED light becomes steady after blinking during charging, it indicates that both the earbuds and case are fully charged.
Show 10 more questions
What happens if I accidentally disconnect the Bluetooth pairing when using Inpods 12?
How do I turn on Inpods 12 earbuds?
How do I ensure the fit of Inpods 12 is secure and comfortable?
How do I pair the Inpods 12 earbuds to my device for the first time?
Can I connect the Inpods 12 to two devices at the same time?
What does the LED light on the charging case indicate during charging?
How do I charge the Inpods 12 earbuds?
What should I do if the charging case is flat and the earbuds are not charging?
How do I pair the Inpods 12 to a device?
How do I charge the battery case of Inpods 12?
Full Manual
1 pages
www.allyeaurychannel.it
Inpods 12 - Manuale D’Uso
Configurazione • Tirare fuori le cuffiette dalla loro confezione di ricarica, inserirle nell’orecchio e aspettare qualche secondo fino a che le cuffiette non si accoppiano fra di loro. • Per connetterle al dispositivo, tenere premuto per alcuni secondi il tasto rotondo sul retro della custodia. • Assicurarsi che il dispositivo a cui sono si vuole accoppiare gli auricolari sia accesso ed il bluetooth sia attivato. • Selezionare sul dispositivo "i12" per connetterle. • Sul dispositivo comparirà la dicitura "connesse". • Per collegare un secondo dispositivo, spegnere il Bluetooth del primo e ripetere la procedura.
ATTENZIONE: potrà essere collegato un solo dispositivo alla volta. Se l’audio è presente solo da una cuffietta (solitamente la destra) vi consigliamo di ripetere la procedura di accoppiamento delle cuffiette, fino a quando l’audio non sarà presente in entrambi gli auricolari. Ricarica Per ricaricare gli auricolari: • Connettere l’alimentare avendo cura che gli auricolari siano alloggiati all’interno della custodia. • La carica ha inizio. Durante la fase di ricarica si accenderà il LED rosso intermittente nella parte posteriore della custodia. • Una volta terminata la ricarica, la luce rossa diventa fissa.
Se la custodia rigida è scarica e gli auricolari non si ricaricano procedere come segue: • Collegare il cavo USB-Micro USB alla custodia rigida. • Collegare il cavo USB-Micro USB ad un sistema di ricarica che abbia un Output USB – 5 V D.C. 1/1.5. • Alimentare il sistema di ricarica. • La carica ha inizio. Procedure di utilizzo Prima di utilizzarle la prima volta, procedere con il caricamento attraverso il cavo in dotazione. Assicurarsi che il dispositivo a cui sono stati accoppiati gli auricolari sia accesso ed il bluetooth sia attivato. Inserire l’auricolare all’interno dell’orecchio ruotarlo fino a raggiungere l’angolazione ideale e più comoda alla morfologia dell’orecchio. Gli auricolari possono essere usati singolarmente o in coppia.