Ask AI
— answers from the official manualAnswers from the official manual.
Common questions
Common Questions
20 totalHow do I enter the network distribution mode on the A9 camera?
After powering on the device, press and hold the reset button for 5 seconds until the blue indicator light blinks quickly to enter the distribution network mode. Once successfully connected via Bluetooth, the blue indicator light will remain solid. You can then customize the device name in the app to confirm successful addition. (Page 1/3)
What should I do if the camera cannot be added to the app after a long time?
Long press the MODE key for 5 seconds to re-enter the distribution network mode and try again. This resets the pairing process so the app can scan and detect the device. (Page 2/4)
What is the WiFi password for connecting via AP Hotspot?
The default AP Hotspot password is 12345678. In your phone's WiFi settings, select the network name starting with 'LLM_', enter this password, and then open the app to view live video. (Page 2/4)
Can I remotely monitor the camera when connected via AP Hotspot?
No, remote monitoring is not possible when using the AP Hotspot connection method. Every time you want to watch the video, your phone must be within approximately 10 meters of the camera in an open, unobstructed space. (Page 2/4)
Why can't I access the internet while connected to the camera's AP Hotspot WiFi?
It is normal to lose internet access while connected to the camera's WiFi during AP Hotspot mode. Simply disconnect from the camera's WiFi network and normal internet access will be restored. (Page 2/4)
What WiFi frequency does the A9 camera support?
The A9 camera only supports 2.4G WiFi and cannot use WiFi networks with a 5G name. You must ensure your phone is connected to a 2.4G WiFi network before attempting to set up the camera. (Page 2/5)
Show 14 more questions
How far can the camera be from the router when using Bluetooth network distribution?
What is the output voltage requirement for the A9 camera?
What app do I need to download to use the A9 camera?
What is the minimum safe distance between the camera and my body due to RF exposure?
How do I connect my Mini DV A9 to WiFi using Bluetooth?
What should I do if my camera cannot be added in Bluetooth distribution network?
What is the process to factory reset my Mini DV A9?
What are the installation tips for AP hotspot connection?
How can I ensure proper installation to avoid poor signal quality?
What output voltage is supported by the Mini DV A9?
How do I check for interference with my WiFi connection?
What safety precautions should I follow when using my Mini DV A9?
What should I do once I complete my Mini DV A9 setup?
Can I modify my camera settings after factory reset?
Full Manual
5 pages
智能摄像头
产品型号A9
使用说明书
1.App 下载及安装
使用微信/浏览器等,扫描二维码下 载应用并安装;2.App 连接
APP 图标:“联了么/Linklemo"
(1)打开App 并注册登录;
(2)打开手机设置连接2.4G wifi 并打 开手机蓝牙; (3)进入配网模式 a.上电开机后,长按5 秒复位键直到蓝色指 示灯快闪进入配网模式;蓝牙配网:在App 中点击添加设备自
动扫描设备,直至扫描到设备后(图1)， 点立即绑定对应设备点击下一步 (图2),添加成功后蓝色指示灯长亮， 可自定义设备名称(图3)即添加成功。 设备名称图1 图2 图3
*若长时间添加不上设备需长按Mode 键
5 秒重新进入配网模式 AP 热点:在手机设置中打开wifi 设置,选择Llm_开头的名称点击输入
密码:12345678 并连接,连接成功后打开App,(图4)即完成连接可点击查看实时
直播视频注意事项
Ap 热点:
1.不能远程监控视频画面,每次需要 观看时手机靠近摄像机10 米左右 (空旷距离无遮挡);2.手机设置里面连接Llm_开头的
Wifi 后打开APP 观看; 3.连接摄像机Wifi 期间,无法正常上 网是正常的断开连接的Wifi 即可 恢复。 蓝牙配网: 1.摄像机距离路由器Wifi 不能超过5 米; 2.不能使用带有5G 名称的Wifi; 3.尽量不要靠近金属门安装(会影响 Wifi 信号缩短连接距离); 4.确保摄像机接通充电电源; 5.安装完成请撕下镜片保护膜再使用。6、输出电压： Dc5V
Smart camera Product model：A9
Instruction Manual
1.Download and Install the APP Using WeChat/browser, etc. , scan the QR code to download and install the APP;
APP icon:Linklemo 2.APP Connection (1) Open the APP, register and log in; (2) Open the mobile phone settings to connect to 2.4G WiFi(wireless fidelity) and turn on the mobile phone Bluetooth; (3) Enter the distribution network mode a. After powering on the device, press and hold the reset button for 5 seconds until the blue finger The indicator blinks quickly to enter the distribution mode. Bluetooth distribution network: Click "Add Device" in APP to automatically scan devices until the device " is scanned (FIG.1), click "Bind Now" corresponding device and click "Next" (FIG. 2). After adding the successful blue indicator lights on, you can customize the device name (FIG.3), which means successful addition.
Fig.1 Fig.2 Fig.2
Figure 4 Figure 5 Matters Needing Attention AP Hotspot:: 1.Unable to remotely monitor video footage. Every time you need to watch, your phone is about 10 meters closer to the camera (open and unobstructed) 2.Connect to LLM_ in the Wifi and then open the APP to watch 3.During the connection of the camera's WiFi, it is normal to not be able to access the internet normally. Disconnect the WiFi and it can be restored
Bluetooth distribution network: 1.The camera distance from the router Wifi shall not exceed 5meters; 2.Wifi with a 5G name cannot be used; 3.Try not to be close to the metal door installation (it will affect the Wifi signal to shorten the connection distance); 4.Ensure that the camera is connected to the charging power supply; 5.When the installation is completed, please remove the lens protective film before use.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.