MY Touch Smart Timer Plug IN Timer



My touch smart timer manual

My smart touch timer not working. My touch smart timer manual troubleshooting. How to reset my touch smart timer. My touch smart timer model 26892 manual. My touch smart timer manual 26892. How to set my touch smart timer. My touch smart timer manual mts53003 user manual. My touch smart timer. My touch smart timer model 26898 manual troubleshooting. My touchsmart timer instructions. My touch

smart timer user manual. My touch smart timer model 26898 manual pdf. My touch smart in-wall timer manual. My smart touch timer instructions. My touch smart timer model 26898 manual.

Introducing the Indoor Digital Simple Set Plug-In Timer! Initial Setup: To get started, simply plug in your timer and let it charge for an hour. Then, press the reset button using a toothpick or pencil. Once charged, you can set your initial time using the up ( ) and down ( ) arrows. Customizing Your Timers: You can set custom on/off times by scrolling through the options using the same up ( ) and down ( ) arrows. Just take note of AM or PM! Default Times: Don't worry if you forget to set your timers – the default settings are 5:00 p.m. for "my on" and 12:00 a.m. for "my off". FCC Statement: This device complies with FCC regulations, ensuring that it won't cause harmful interference or receive unwanted signals. Programming Your Timer: To program your timer, choose your custom "my on time" by pressing the corresponding button. Then, use the up ( ) and down ( ) arrows to set your desired on/off times. If you set your "my on time" earlier than the current time, it will automatically adjust! Once your "my on time" is set, wait five seconds or press the buttons again to start setting the off time. To customize the off time, press "my off time," and use the up and down arrows to adjust the time until you reach the desired setting. Once the off time is set, you can either wait five more seconds or press "my on time" again to begin setting the next on-time. Note: When a my-on or my-off time is set, an active program indicator arrow will appear on the screen beside the button. Preset Schedules: There are three pre-programmed times that run individually or simultaneously. You can choose from the following: * "evening" (5pm-12am) * "morning" (5am-8am) * "all night" (6pm-6am) When a preset schedule is chosen, the blue LED indicator light will turn on. If you need to make adjustments, you can use custom my-on and my-off times to modify the preset. Countdown: To set a countdown, press "countdown," then use the up and down arrows to set the time from 1 minute to 24 hours. The last countdown time set will become the new default until the countdown button is pushed again. Note: When daylight savings time occurs, you can adjust the time by one hour using the up and down arrows. Setup: If no numbers are visible on-screen, plug the timer into an outlet and let it charge for 1 hour. Once charged, press the reset button to start using the timer. Safety Precautions: * Use indoors only. * Do not use near water or in wet locations. * Keep children away from the timer. * Unplug the timer before cleaning. * Do not exceed electrical ratings. * Do not use with extension cords. * Risk of fire: do not use to control appliances that contain heating elements. Warranty Information: This Jasco product comes with a 1-year limited warranty. For more information, visit www.byjasco.com or contact us at 1-800-654-8483 between 7:00AM–8:00PM CST. 1. Set the time on your digital timer using the up and down arrows. Make sure to note if it's set to AM or PM. 2. Choose your custom on/off times: * Press "my on time" and use the up and down arrows to set the desired time. * Press "my off time" and use the up and down arrows to set the desired time. 3. Mount the timer near a GFCI receptacle, making sure it's at least 4ft above ground level with outlets facing downwards. 4. Follow safety precautions: * Plug directly into a GFCI protected outlet * Unplug before cleaning * Fully insert plug * Keep away from children and water * Not for use near heating elements or appliances with electrical ratings exceeding the timer's capacity 5. This product comes with a 1-year limited warranty. For more information, visit www.jascoproducts.com or contact customer support at 1-800-654-8483. 6. The device complies with FCC and Industry Canada license-exempt RSS standards. This equipment has been tested to comply with FCC Rules for a Class B digital device, ensuring reasonable protection against harmful interference in residential installations. However, improper installation or use can cause radio frequency energy emissions that may interfere with radio communications. Users are encouraged to take corrective action if interference occurs, such as adjusting the antenna position, separating the equipment from the receiver, or consulting a professional for assistance.