Parkside Pmrda 20 Li B2 Robot Lawn Mower

How do I change my PIN code?

Open the cover and unlock the display with your current PIN. Navigate to "Settings," select "Change PIN," and follow the on-screen instructions to set a new PIN.

How do I turn on the Parkside Pmrda 20 Li B2 for the first time?

Press and hold the START button for approximately 3 seconds until the display lights up. Then use the arrow buttons to select your preferred language and confirm with the OK button. After that, set the current date and time using the arrow buttons and confirm each selection with the OK button.

What should I do if I see error code E1?

Error code E1 indicates a boundary wire error. You should check the boundary wire for breaks or disconnections. Inspect the entire wire perimeter to ensure it is intact and properly connected to the charging station.

How do I adjust the cutting height on my robot mower?

Ensure the mower is turned off and the blades have stopped, then lift the cover to access the cutting height adjustment. Turn the rotary wheel to select your desired cutting height between 25 – 60 mm, and then secure the cover back in place.

What does error code E3 mean and how do I fix it?

Error code E3 indicates a battery error. You should recharge the battery or replace it if necessary. Check that the charging station is properly connected and the battery is making good contact with the charging contacts.

How do I set up a mowing schedule?

Open the cover and unlock the display with your 4-digit PIN. Press the OK button, use the arrow buttons to select "Schedule," and confirm with the OK button. Choose the day of the week, define the start and end times for mowing, then press OK to save the schedule.