!
error GE
Error Code Rinse Light Flashing
Not enough water is entering the dishwasher.
? What Causes This
Water supply turned off, household water supply off, or inadequate well/cistern water supply.
✓ How to Fix It
- Unlatch the door and check if there is water in the bottom of the dishwasher.
- Verify the dishwasher water supply valve (usually under sink) is turned on.
- Verify the household water supply is turned on.
- If using well or cistern water, verify supply is adequate.
- Press the RESET pad.
- Try the cycle again. If the RINSE light flashes again, call for service.
Source: page 11 of the official manual
From the manual
This error code appears in:
GE GSD4210 Top Control Dishwasher