!
error GE
Error Code Wash Light Flashing
Drain is blocked. The drain is so clogged that the dishwasher cannot continue to operate in a satisfactory manner and will stop.
? What Causes This
Blocked drain system, kinked drain hose, clogged air gap, or stopped-up household drains.
✓ How to Fix It
- Check the air gap and clean if necessary.
- Check for a kink in the drain hose.
- Check for stopped-up drains.
- To pump remaining water out: Latch door, touch RESET, select desired cycles, touch START and RESET again. Note: Warranty does not cover household drain problems.
Source: page 11 of the official manual
From the manual
This error code appears in:
GE GSD4210 Top Control Dishwasher