Question 1

How do I bypass a zone on the VISTA-20P?

Accepted Answer

To bypass a zone, press the [*] key, followed by the zone number, and then press [#]. The keypad will display the bypassed zone number, indicating that it is excluded from the current arming mode. This allows you to arm the system while leaving certain areas unprotected.

Question 2

What is the difference between Error Code 3 (Low Battery) and Error Code 4 (System Tamper)?

Accepted Answer

Error Code 3 indicates the backup battery voltage is low and needs replacement to maintain system operation during power outages. Error Code 4 indicates the system has been tampered with and requires investigation of the control panel enclosure and connections. Refer to the user manual for detailed troubleshooting steps for each error code.

Question 3

Is the VISTA-20P compatible with the 6160RF keypad?

Accepted Answer

Yes, the VISTA-20P is compatible with the 6160RF keypad. Firmware version 9.18 and compatible versions support the 6160RF keypad for wireless control and system management.

Question 4

Why is my system not arming and what should I check?

Accepted Answer

If your system is not arming, first ensure all doors and windows are closed and secured. Check for any faulted zones displayed on the keypad. Verify that the system is powered on and the backup battery is functional. Address any zone faults before attempting to arm again.

Question 5

What are the arming modes available on the VISTA-20P?

Accepted Answer

The VISTA-20P supports five arming modes: Stay, Night-Stay, Away, Instant, and Maximum. Each mode provides different levels of protection and allows flexibility in securing your premises based on your specific needs.

Question 6

Can I use the VISTA-20P as a direct replacement for a VISTA-10P system?

Accepted Answer

Yes, the VISTA-20P can replace a VISTA-10P system without issues. It offers all the features of the 10P with additional zones and capabilities, making it a compatible upgrade for existing 10P installations.

Question 7

How many zones does the VISTA-20P support and what types of zones are available?

Accepted Answer

The VISTA-20P supports up to 24 total zones, including 8 hardwired zones and 16 wireless zones. Each wireless transmitter can control up to 8 wireless zones, allowing flexible configuration for residential and commercial premises.

Question 8

Is the VISTA-20P RF capable out of the box, or do I need to add a wireless module?

Accepted Answer

The VISTA-20P is not RF capable out of the box. To add wireless devices, you must install a 6160RF Keypad or a standalone receiver such as the 5881ENL, 5881ENM, or 5881ENH, depending on your system's requirements.

Question 9

How do I arm and disarm the VISTA-20P system?

Accepted Answer

To arm the system, enter your 4-digit security code followed by the desired arming mode key (Away, Stay, or Night). To disarm the system, enter your 4-digit security code followed by the [OFF] key. The system provides an exit delay when arming and an entry delay when disarming.

Question 10

What does Error Code 2 (Loss of AC Power) mean and how do I fix it?

Accepted Answer

Error Code 2 indicates a loss of AC power to the system. Verify that the power transformer is properly connected to the control panel and plugged into a functional electrical outlet. Check that the backup battery is functional to maintain system operation.

Question 11

What does Error Code 3 mean?

Accepted Answer

Error Code 3 indicates a low battery condition in the system. (Page 1)

Question 12

How many zones does the VISTA-20P support?

Accepted Answer

The VISTA-20P supports up to 24 total zones, including 8 hardwired zones and 16 wireless zones. Each wireless transmitter can control up to 8 wireless zones. (Page 1)

Question 13

How do I bypass a zone on the VISTA-20P?

Accepted Answer

To bypass a zone, press the [*] key, followed by the zone number, and then press [#]. The keypad will display the bypassed zone number, indicating that it is excluded from the current arming mode. (Page 1)

Question 14

Can the VISTA-20P replace a VISTA-10P system?

Accepted Answer

Yes, the VISTA-20P can replace a 10P system without issues. It offers all the features of the 10P with additional zones and capabilities. (Page 1)

Question 15

Is the VISTA-20P RF capable without additional equipment?

Accepted Answer

No, the VISTA-20P is not RF capable out of the box. To add wireless devices, you must install a 6160RF Keypad or a standalone receiver like the 5881ENL, 5881ENM, or 5881ENH, depending on your system's requirements. (Page 1)

Question 16

What should I do if my system won't arm?

Accepted Answer

First, ensure all doors and windows are closed and secured. Check for any faulted zones displayed on the keypad. Verify that the system is powered on and the backup battery is functional.

Question 17

Where should I mount the VISTA-20P control panel?

Accepted Answer

Select a secure, dry, and easily accessible location, typically in a utility closet or basement. Ensure the location is within reach of a power outlet for the transformer and mount the aluminum enclosure securely to a wall using appropriate fasteners. (Page 1)

Question 18

How many total zones does the VISTA-20P support?

Accepted Answer

The VISTA-20P supports up to 24 total zones, including 8 hardwired zones and 16 wireless zones. Each wireless transmitter can control up to 8 wireless zones.

Question 19

How do I power up the VISTA-20P after installation?

Accepted Answer

Connect the power transformer to the control panel and plug it into a standard electrical outlet. Insert the backup battery into its compartment, ensuring correct polarity. Verify that the system powers up and displays the appropriate status indicators.

Question 20

Can I add wireless motion detectors to the VISTA-20P without additional equipment?

Accepted Answer

No, the VISTA-20P is not RF capable out of the box. To add wireless devices, you need to install a 6160RF Keypad or a standalone receiver like the 5881ENL, 5881ENM, or 5881ENH, depending on your system's requirements.

Question 21

Is the VISTA-20P compatible with the Tuxedo Touch WIFI keypad?

Accepted Answer

Yes, the VISTA-20P is compatible with the Tuxedo Touch WIFI keypad. The Tuxedo Touch also has a mode for basic keypad use when programming the alarm panel during setup.

Question 22

How do I bypass a specific zone in the VISTA-20P?

Accepted Answer

Press the [*] key, followed by the zone number, and then press [#]. The keypad will display the bypassed zone number, indicating that it is excluded from the current arming mode.

Question 23

How do I disarm the system when I arrive home?

Accepted Answer

Upon re-entry, the system will initiate an entry delay. Enter your 4-digit security code followed by the [OFF] key to disarm the system and silence any alarms.

Question 24

Where should I mount the VISTA-20P control panel in my home?

Accepted Answer

Select a secure, dry, and easily accessible location, typically in a utility closet or basement. Ensure the location is within reach of a power outlet for the transformer, and mount the aluminum enclosure securely to a wall using appropriate fasteners.

Question 25

What does Error Code 3 mean on my VISTA-20P?

Accepted Answer

Error Code 3 indicates a low battery condition. You should replace or recharge the backup battery to ensure proper system operation during power outages.

Question 26

What should I check if I'm experiencing false alarms?

Accepted Answer

Check for any environmental factors that may have triggered sensors, such as pets or drafts. Ensure that all sensors are clean and free from obstructions, and test each sensor individually to identify any malfunctioning devices.

Honeywell Vista-20P Security Panel

Ask AI

Common Questions

More from Honeywell