Lost Vape E40 Centaurus Pod Kit

How do I turn on and off the Lost Vape E40 Centaurus Pod Kit?

Press the Fire button 5 times consistently within 2 seconds to turn the device ON or OFF. This is the standard activation/deactivation method for the device.

What should I do before vaping with a new coil?

Prime the new coil by filling your tank with e-liquid and letting it stand for at least 5 minutes before vaping. This allows the cotton inside the coil to absorb enough e-liquid for optimal flavor and to prevent dry burning.

Why is my LED panel flashing red 5 times and the device won't work?

The LED flashing red 5 times indicates a low battery condition. The output automatically cuts off when battery voltage drops below 3.3V before use or lower than 2.85V during use. You need to charge your device using the Type-C port.

What does it mean when the LED flashes 3 times?

The LED flashing 3 times indicates that no atomizer has been detected. Make sure your pod/cartridge is properly inserted into the device. If the problem persists, try removing and reinserting the pod.

How do I lock and unlock the Fire button?

Press the Fire button 3 times consistently within 2 seconds to toggle the lock/unlock function. Note that the Auto Draw feature will continue to work even when the button is locked.

What is the proper way to fill the pod with e-liquid?

Take out the pod, open the e-liquid refilling plug, refill from the filling slot, seal the plug, and put the pod back into the device. Then wait at least 5 minutes before vaping to allow the coil to properly absorb the e-liquid.