Sca Full HD 1080P Dash Cam

How do I set up and install the Sca Full HD 1080P Dash Cam in my vehicle?

First, ensure your windscreen is clean and attach the suction cup mount, then lock it into position. Insert the Micro SD card into the Dash Cam and connect the power cable to both the device and your vehicle's 12V power socket. Adjust the mounting bracket and camera direction for optimal viewing, then turn on your vehicle's ignition—the Dash Cam will power on and start recording automatically.

How long does it take to charge the dash cam and what charger should I use?

The Dash Cam takes approximately 2 hours to fully charge using the provided 12V in-car USB charger. A red indicator light will turn off once charging is complete. For battery maintenance, it's also recommended to charge the device on a 5V home charger for 2-3 hours with the device off at least once a week.

What Micro SD card specifications and capacity does this dash cam support?

The Sca Full HD 1080P Dash Cam supports Micro SD cards up to 64GB (card not included). For optimal performance and to prevent recording issues, use a high-speed Micro SD card with Class 10 or above specifications. Using a larger capacity card than 64GB may not be compatible with the device.

How do I format the Micro SD card in the dash cam?

Insert the Micro SD card into the Dash Cam, then navigate to the 'Format' option in the settings menu and confirm the formatting process. It is advisable to format the Micro SD card weekly if the G-sensor mode is active, as locked footage can fill up the card and cause recording to stop. The Dash Cam will not automatically record once turned on until it's formatted.

What should I do if the dash cam shows 'No SD Card' or 'Card Error' messages?

For a 'No SD Card' error, ensure the Micro SD card is inserted correctly and has sufficient space. For a 'Card Error,' format the Micro SD card through the settings menu or replace it if it appears damaged. If the error persists after formatting, the card may be defective and should be replaced.

How do I reset the Sca Full HD 1080P Dash Cam?

Insert a fine-point paper clip into the reset hole on the side of the unit and press and hold for a few seconds until the Dash Cam restarts. This will restore the device to its default settings without erasing your recorded files.