AskManual.ai
Ausdom ANC8 Noise Cancelling Wireless Headphones manual
Headphones · 10 Q&As

Ausdom ANC8 Noise Cancelling Wireless Headphones

Download PDF Manual Ask about this product

Ask AI

— answers from the official manual

AI-powered answers from the official manual. Verify critical info.

Common questions

Common Questions

10 total
1

How long does it take to fully charge the Ausdom ANC8 headphones?

It takes about 1.5 hours for the first charge and approximately 1 hour for subsequent charges. The LED indicator turns solid red during charging and turns off when the battery is fully charged. It is strongly recommended to fully charge the headphones before first use.

2

What should I do if the headphones won't pair with my mobile phone?

Check that the headphones are fully charged, the mobile phone's Wireless function is on, and both devices are within 33 feet/10 meters of each other. Make sure there are no obstacles between the devices, other paired devices have their wireless function turned off, and the headphones are in pairing mode. If still having issues, try removing some existing Wireless connections and pairing again.

3

How do I turn on the Active Noise Cancelling feature?

Press the ANC (Noise-Canceling) switch to the ON position, and the blue LED light will turn on. The noise cancelling function works primarily for low-frequency noise such as in airplanes, buses, or trains, though the effect may vary depending on how you wear the headphones.

4

What is the wireless range of the ANC8 headphones?

The Ausdom ANC8 uses Wireless V5.0 and has an effective pairing range of 33 feet/10 meters. The headphones will automatically pair with the last paired device when turning on.

5

How long is the battery playtime on the ANC8?

The headphones provide approximately 35 hours of talk/music time with Active Noise Cancelling off and approximately 30 hours with ANC on. With fast charging, 5 minutes of charging provides 2 hours of playtime.

6

Can I use the ANC8 as a wired headphone?

Yes, there is a 3.5mm audio port on the left side of the ear cup where you can plug the included audio cable to connect the ANC8 to other devices. When used as a wired headphone, the microphone cannot work, but you can still enjoy music without worrying about battery drain.

Show 4 more questions

What should I do if the headphones cannot be turned on?

How should I care for and store the ANC8 headphones?

What steps should I follow to pair the ANC8 with a device?

What is the recommended volume usage to protect my hearing?

Full Manual

11 pages
Page 1
Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 1

User Manual Wireless Headphones Model: ANC8

Page 2
Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 2

  • Package Contents
  • Product Overview
  • Introduction
    • Thank you for purchasing the AUSDOM ANC8 Wireless Active Noise Cancelling Headphones. AUSDOM ANC8 active noise cancelling technology detects the noise around you and cancels it out while traveling, working or going anywhere, helping you focus on what you want to hear. The look of ANC8 is fashionable and its package is eco-friendly. Built-in rechargeable battery provides sufficient music playtime and standby time (Fast Charging: 5-minute charging for 2-hour playtime). It’s designed to sound better, filter out noise, be more comfortable and easier to carry. ANC8 can be used in both wired and wireless modes via 3.5mm audio cable and Wireless V5.0 to communicate with your Wireless-enabled device within 33 ft/10 m. Its powerful and rich bass speaker brings you amazing and unprecedented audio enjoyment. Note: Please read the user manual carefully before using, and keep it properly for future reference. -1 x Wireless Headphone -1 x Micro USB Charging Cable -1 x 3.5mm Audio Cable -1 x User Manual -1 x Compact Carrying Case

    En-1

    8/9 2 5 4 7 6 1 3

    Page 3
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 3

  • Charging the Headphone
    • Use the supplied micro USB charging cable to recharge the battery. It takes about 1.5 hours for the first charge and after charging for as long as 1 hours. The headphone LED turns to solid red during charging. When the battery is fully charged, the LED turns off. In order not to affect the charging time, please turn off the wireless function during charging, but you still can use the audio cable. When the battery is low, the LED indicator light blinks red. At the same time the headphones also provide a low battery warning tone. Note: It is strongly recommended fully charging for the first use. Playtime varies according to volume level and audio content .
  • Microphone
  • 3.5mm Line-in Port
  • Power Button
  • Previous Track/V-
  • Next Track/V+
  • LED Indicator/Charging LED
  • Micro USB Interface for charging
  • ANC LED Indicator
  • ANC Switch
  • Micro USB Charging Cable
  • 3.5mm Audio Cable

    • En-2

    10 11

    Page 4
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 4

  • Pairing with Wireless Devices
    • 1). Make sure the headphones is off. 2). Do not place both devices more than 3ft/1m away from each other. 3). Turn on the Wireless function of your devices. 4). Press and hold the power button on the headphones until it powers on but don't let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphones is in "pairing mode" waiting to be paired with your device. You will hear a prompt. 5). Select the ''AUSDOM ANC8'' to pair. Once successfully paired, the LED turns to solid blue. You will hear a prompt. Note: Before pairing the headphones with computer, please make sure your computer or laptop has the built-in Wireless feature. If not, you must purchase a Wireless dongle, preferably version 2.1 or above. AUSDOM ANC8 will pair with the last paired device automatically when turning on. Because of different systems, some computers or laptops may need to be manually paired every time.

    En-3

    Page 5
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 5

    En-4

    6.Active Noise Canceling AUSDOM ANC8 contains a noise cancelling circuit, Noise mainly in an airplane, buses or trains is effectively reduced. 1).The noise cancelling effect may not be pronounced in a very quiet environment, or some noise may be heard. 2).The noise cancelling effect may vary depending on how you wear the headphones. 3).The noise cancelling function works for noise in the low frequency band primarily. Although noise is reduced, it is not canceled out completely.
  • Making and Answering a Call
    • 7-1 Making a call 1.Make sure the headphones are paired with the mobile phone. Dial through the mobile phone and press the call button on the phone. 2.To end a call, press the power button once again or also end the call directly by the phone. 7-2 Answering a call Make sure the headphones are paired with your phone. Please refer to chapter 5. Pairing with Wireless devices. 1.Press the power button on your headphones to answer the call through headphones. If there is the music playback, it will pause. 2.To end a call, press the power button once again or also end the call directly by the phone. 3.As soon as the call is ended, the music will continue to play automatically.

    Page 6
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 6

    En-5

  • Taking Care of Your Headphones
  • Store the headphones in the carrying case and in a dry place
    • when it powers off.
  • If you don’t use the headphones for a long period, charging
    • the battery every 2 months for 1-2 hours.
  • Use a dry cloth for cleaning if needed.
  • Avoid dropping the headphones from high places or on hard
    • surfaces.
  • Avoid exposing the headphones to extreme temperature.
    • (Recommended Storage temperature is -40˚C-80˚C.)
  • The headphones are NOT waterproof. Avoid exposing the
  • Used as a Wired Headphone
    • There is a 3.5mm audio port on the left side of ear cup in which you can plug the included audio cable. It enables you to connect ANC8 to other devices via 3.5mm audio cable. When the headphone's battery is low, you can still enjoy the music without worrying battery drain. Note: The microphone can't work when used as wired headphones. Using as a wired headphone with a 3.5mm audio cable

    Page 7
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 7

    En-6

  • Protecting your Hearing
    • The headphones are held close to your ears, so loud sounds pose a potential hearing risk. It is highly recommended that setting low volume level before putting on the headphones are and avoiding exposing yourself continuously to high volumes. If you need to use the headphones for a long period, rest ten minutes for a half hour using. Avoid exposing to liquids and rain Avoid exposing to extremely temperature Avoid dropping from high places headphones to rain or getting liquids into any button port or other openings.
  • Please don’t twist or bend the headphones. This may cause
    • permanent deformation.
  • The built-in battery can’t be disposed in the fire to avoid
    • explosion.

    Page 8
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 8

    En-7

    Note: There will be an alert tone when the volume reaches the maximum level.
  • Control Instructions
    • Function Operation Play media Press the power button End a call Press the power button Power on Press and hold the power button for 3 seconds, and you will see the blue light flash and hear “power on”. Answer a call Press the power button to answer the call. Power off Press and hold the power button for 3 seconds, and you will hear “power off”. Pause/restart media playback Press the power button Increase volume Decrease volume Skip to next track Press and hold the V+ button for 1-2s Skip to previous track Press and hold the V- button for 1-2s Noise Canceling On Press the Noise-Canceling Button to ON, Blue LED light on. Noise Canceling Off Press the Noise-Canceling Button to OFF, Blue LED light off Play media Press the power button End a call To end a call, press the power button Answer a call When a call rings, press the power button Pause/restart media playback Press the power button Increase volume Press the Volume Up V+ button Decrease volume Press the Volume Down V- button Skip to next track Press and hold the V+ button for 1-2s Skip to previous track Press and hold the V- button for 1-2s ANC On Push the ANC switch to ON, blue light on. ANC Off Push the ANC switch to OFF, blue light off. Pairing Press and hold the power button for about 5 seconds till the red and blue light flash alternatively, and you will hear “paring”.

    Page 9
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 9

    En-8

  • Troubleshooting
    • Q: The headphones cannot be turned on. A: The battery may be flat. Please recharge the battery and try again. Refer to chapter 4. Charging the Battery. Q: Why don’t the headphones pair with the mobile phone? A: Please check the followings.
  • Check that the headphones are on a full charge.
  • Make sure that the mobile phone's Wireless function is on.
    • You can clear all connection history on your phone.
  • Make sure other paired device’s wireless function is
    • turned off.
  • Make sure the two devices are in the effective pairing
    • range. (33 feet/10 meters).
  • Make sure that there is no obstacle between the
    • headphones and the mobile phone, such as electronic equipment and a wall.
  • Furthermore, make sure that the headphones are in
    • pairing mode, and pair it with phone again. Q: There is some noise.
  • A: Wireless is a radio technology, so it is sensitive to
    • obstacles between the headphones and the pairing device. Please make sure that there is no obstacle between the two devices and is within 33 feet/10 meters. Q: I can't hear sound. A: Please check the followings.
  • Try increase the volume.

    • Page 10
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 10

    En-9

  • Make sure that the Wireless function is on and whether
    • the two devices are connected and within 33 feet/10 meters. Q: My mobile phone or computer cannot find the headphones. A: Please check that the headphones are in pairing mode. Refer to chapter 5. Pairing with Wireless devices. Sometimes when the headphones are connected too many Wireless devices, it cannot search and pair effectively. Or your mobile phone and computer are already connected to many other devices. Try removing some connections before searching the headphones.
  • Warranty
    • The ANC8 is covered by a 1-year manufacturer warranty. For more information, https://www.ausdom.com.

    Page 11
    Ausdom ANC8 Noise Cancelling Wireless Headphones manual — page 11

    En-10

    Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.
  • Specifications
    • Microphone Unit 4*1.5mm Directivity Omni-directional

    S.P.L

    -42dB Impedance

    ≤2.2Kω

    Operating Voltage 2V Speaker Diamete Φ40mm Impedance

    32Ω

    S.P.L

    95dB

    Thd

    ＜3% Frequency Response 20Hz-20KHz Microphone Spec. Wireless Version

    V5.0

    Wireless Distance 33ft/10m Support Profile

    Hsp/Hfp/A2Dp/Avrcp

    Pairing Name

    Ausdom Anc8

    Charging Port Micro USB 5V/1A Standby Time More than 2500 hours Charging Time About 1 hour Operating temperature

    -10˚C-45˚C

    Playtime Transmission Frequency 2.402GHz-2.48GHz Speaker Spec. Wireless Tech. Battery Type Built-in 500mah rechargeable lithium battery (support fast charging) Battery Spec. About 35-hour talk/music time

    (Anc Off)

    About 30-hour talk/music time

    (Anc On)

    Similar Headphones

    Btootos

    A90 Pro Wireless Earbud Bluetooth Earbuds

    26 Q&As

     Baseus

    Bowie MA10 Tws Wireless Earbuds

    24 Q&As

     Beats

    Factory Headphones

    5 Q&As

     Beats

    Flex Wireless Earbuds Apple W1 Headphone Complete Featuresinstruction

    20 Q&As