Evenflo Litemax Infant Car Seat

What are the weight and height requirements for the Evenflo LiteMax Infant Car Seat?

The Evenflo LiteMax Infant Car Seat is designed for infants weighing 4 to 35 pounds and measuring 17 to 32 inches tall. These specifications ensure the car seat provides proper support and safety for your child within this size range.

How do I install the Evenflo LiteMax car seat base in my vehicle?

Place the car seat base on the vehicle seat in the rear-facing position and route the vehicle's lap and shoulder belt through the designated belt path on the base. Engage the vehicle belt lock-off mechanism to secure the base tightly, verify the recline angle using the recline indicator is in the green zone, and then attach the infant car seat to the base ensuring it clicks securely into place.

Can I use the Evenflo LiteMax car seat without the base?

Yes, the LiteMax Infant Car Seat can be installed using only the vehicle's seat belt. Place the car seat on the vehicle seat in the rear-facing position, route the vehicle's lap and shoulder belt through the designated belt guides on the car seat shell, buckle and tighten the belt to remove all slack, and ensure the car seat does not move more than one inch side-to-side or front-to-back at the belt path.

How do I adjust the harness straps as my child grows?

To adjust the harness height, remove the car seat from the base, press the harness adjuster button, and slide the harness straps to the desired position. Ensure the harness straps are at or below your child's shoulders when rear-facing.

How do I properly secure my child in the Evenflo LiteMax car seat?

Place your child in the car seat with their back flat against the seat back, bring the harness straps over their shoulders and between their legs, connect the two harness buckle tongues into the buckle, and pull the harness adjustment strap to tighten until it is snug against your child's body.

What should I do if the car seat moves more than one inch after installation?

Ensure the base is installed correctly and securely, check that the vehicle seat belt is properly routed through the belt path, and verify that the car seat is properly attached to the base. If the issue persists, contact Evenflo ParentLink Consumer Care.