Evenflo Nurturemax Infant Car Seat

Should I replace my car seat base if it was in a crash?

Yes, you should not use a car seat base that has been involved in a crash, even if it appears undamaged. Replace it immediately for safety reasons.

What is the weight range for children who can use the Evenflo NurtureMax Infant Car Seat Base?

The base is designed for children weighing between 4 and 22 pounds (1.8 to 10 kg). Children outside this weight range should not use this car seat base.

How do I install the car seat base using the LATCH system?

Locate the lower anchors in your vehicle's seat (typically in the crease between the seat back and bottom cushion), then attach the lower anchor connectors from the base to the vehicle's anchors. Press down firmly on the base while pulling the LATCH strap to tighten it, ensuring the base does not move more than 1 inch side-to-side or front-to-back. Verify the level line indicator is correct before use.

What should I do if the base moves more than 1 inch after installation?

Re-install the base, ensuring the LATCH strap or vehicle seat belt is pulled as tight as possible while pressing down on the base. Verify that the belt path is correct according to the manual.

How do I attach the infant car seat to the base?

Align the infant car seat with the base and lower it onto the base until you hear an audible "click," indicating it is securely latched. Always verify the car seat is firmly attached by lifting the car seat handle—it should not lift off the base.

How do I detach the infant car seat from the base?

Locate the car seat release handle or button (typically at the back or front of the car seat), press or pull the release mechanism, and simultaneously lift the infant car seat straight up from the base.