Ask AI
— answers from the official manualAI-powered answers from the official manual. Verify critical info.
Common questions
Common Questions
10 totalHow do I power on the Vne LX3 smartphone?
Press and hold the power button until the screen turns on. The power button is located on the side of the device and also functions as a fingerprint sensor.
How do I power off the Vne LX3?
Press and hold the power button, and then touch the power off option on the screen. This will safely shut down your device.
What should I do if my device is frozen or not responding?
Press and hold the power button for 10 or more seconds to force restart your device. This will restart the phone without losing your data.
Can I use cut or modified SIM cards in the Vne LX3?
No, you should not use cut or modified SIM or microSD cards as these may not be recognized and could damage the card tray (slot). Always use properly sized cards that match your device specifications.
What are the ideal operating and storage temperatures for the Vne LX3?
The ideal operating temperatures are 0°C to 35°C, while ideal storage temperatures are -20°C to +45°C. Keeping your device within these ranges ensures proper performance and longevity.
How far should I keep the Vne LX3 away from a pacemaker?
Pacemaker manufacturers recommend maintaining a minimum distance of 15 cm between the device and a pacemaker to prevent potential interference. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry it in your front pocket.
Full Manual
10 pages
Quick Start Guide
Vne-Lx1 Vne-Lx2
Vne-Lx3
Know Your Device Before using the device, familiarize yourself with its basic operations.
Nfc
Volume button Power button/ Fingerprint sensor USB Type-C port Headset jack Card slot
Getting Started
For the countries that adopted the SAR limit 2.0 W/kg over 10 grams of tissue. The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. VNE-LX1: The highest reported SAR value: head SAR: X.XX W/kg; body SAR: X.XX W/kg. VNE-LX2: The highest reported SAR value: head SAR: X.XX W/kg; body SAR: X.XX W/kg. For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue. The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. VNE-LX1: The highest reported SAR value: head SAR: X.XX W/kg; body SAR: X.XX W/kg; hotspot SAR: X.XX W/kg. VNE-LX3: The highest reported SAR value: head SAR: 1.02 W/kg; body SAR: 0.58 W/kg; hotspot SAR: 0.96 W/ kg. EU Regulatory Compliance (only applies to VNE-
Lx1 / Vne-Lx2)
Statement Hereby, Honor Device Co., Ltd. declares that this device VNE-LX1 / VNE-LX2 is in compliance with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP2009/125/Ec.
The full text of the EU declaration of conformity, the detailed ErP information and most recent information about accessories & software are available at the following internet address: https://www.hihonor.com/global/legal/certi ication/. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. Restrictions in the 5 GHz band: The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE,El, Es, Fi, Fr, Hr, Hu, Ie, Is, It, Li, Lt, Lu, Lv, Mt, Nl, No,
Pl, Pt, Ro, Se, Si, Sk, Tr, Uk(Ni).
6
Frequency Bands and Power The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:
Vne-Lx1
Vne-Lx2
XXXX dBm FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Honor Device Co., Ltd. for compliance could void the user's authority to operate the equipment. Legal Notice Trademarks and Permissions Android is a trademark of Google LLC. 7
LTE is a trademark of ETSI. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. Copyright © Honor Device Co., Ltd. 2022. All rights reserved.
All Pictures And Illustrations In This Guide,
Including But Not Limited To The Device Color,
Size, And Display Content, Are For Your
Reference Only. The Actual Device May Vary.
Nothing In This Guide Constitutes A Warranty
Of Any Kind, Express Or Implied.
Privacy Policy To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/. 8