LG WM3555HWA

What are the key specifications of the LG WM3555HWA washer and dryer combo?

The LG WM3555HWA is a 2.4 cubic foot capacity all-in-one compact front load washer and dryer combo with a 24-inch width available in White or Graphite Steel. It features 14 wash cycles, a maximum spin speed of 1,400 RPM, ventless condensing drying, and includes advanced features like TurboWash™ Technology, AI Fabric Sensor, Steam Technology, and the Direct Drive Motor with a 10-year limited warranty.

How do I set up the LG WM3555HWA when I first receive it?

Start by carefully removing the washer from packaging and placing it on a flat, stable surface near water supply and drainage. Connect the inlet hoses to water supply valves, attach the drain hose to the drainage system, plug it into a grounded electrical outlet, and adjust the leveling feet for stability. Finally, remove the four shipping bolts at the rear of the machine and run a test cycle without laundry to ensure proper operation.

How do I connect my WM3555HWA to Wi-Fi and use the LG ThinQ app?

Press and hold the 'Delay Wash' button for 3 seconds to enable Wi-Fi connectivity, then follow the instructions in the LG ThinQ® app to complete the setup. Once connected, you can use the app for remote control and monitoring of your washer and dryer combo.

What should I do if my WM3555HWA is not draining or shows an OE error code?

The OE error code indicates a drainage error. Check the drain hose for kinks or blockages, and ensure the drainage system is functioning properly. If the problem persists, contact customer service for further assistance.

What does the UE error code mean and how do I fix it?

The UE error code indicates an unbalanced load in the drum. To fix this, pause the cycle, open the door, and redistribute the laundry evenly throughout the drum. This will help the washer complete the cycle properly.

How do I stop excessive vibration in my WM3555HWA?

Ensure the washer is properly leveled by adjusting the leveling feet and confirm that all four shipping bolts have been removed from the rear of the machine. Additionally, do not overload the washer with laundry, as this can cause excessive vibration. Check that all connections are secure.