Keurig B60 Coffee Maker

How do I set up my Keurig B60 for the first time?

First, unwrap the cord and plug the brewer into a grounded outlet, then remove all packing tape and plastic stickers from the LCD display. Remove the water reservoir, rinse it with fresh water, and fill it with bottled or filtered water just below the top edge. Place the reservoir back into the left side of the brewer ensuring the lock tabs engage, then replace the lid. Press the Power Button, press the Small Mug Button to fill and heat the internal tank (approximately 4 minutes), then press the Small Mug Button again to run a cleansing brew and pour the hot water into the sink. Your one-time setup is now complete and you're ready to brew.

What are the three brew size options on the B60?

The Keurig B60 offers three brew size options: Small Cup (5.25 oz.), Small Mug (7.25 oz.), and Large Mug (9.25 oz.). You select your desired brew size by pressing the corresponding button on the LCD control center after inserting a K-Cup and closing the handle.

How do I clean the K-Cup Holder Assembly?

The K-Cup Holder Assembly is dishwasher safe and should be cleaned using low-temperature cycles. To remove it, lift the handle to open the cover, then grasp the top of the K-Cup Holder with one hand while pushing up on the bottom from underneath until it releases. After cleaning, align the K-Cup Holder with the opening using the two front ribs as a guide and snap it into place from the top. The Funnel can be removed by pulling until it snaps off and is also dishwasher safe.

What does the 'DE-SCALE' message mean and how do I fix it?

The 'DE-SCALE' message indicates that calcium deposits or mineral scale has built up in your brewer and is interfering with performance. To de-scale, fill the water reservoir with undiluted white vinegar, run three large mug brew cycles without a K-Cup, then let the brewer stand for at least 4 hours. Next, fill the reservoir with fresh water and run brew cycles until the reservoir is empty, repeating as needed until any residual taste is gone. If 'DE-SCALE' is still displayed after completing this procedure, repeat the entire de-scaling process.

How often should I de-scale my Keurig B60?

You should de-scale your brewer every 3 to 6 months to ensure optimal performance and maintain the heating element. However, if the 'DE-SCALE' message appears on the LCD Control Center, you should de-scale immediately, as continued scale buildup could damage the brewer. The frequency may need to be more often depending on the mineral content of the water in your area.

Can I clean the water reservoir in the dishwasher?

No, the Water Reservoir and Water Reservoir Lid should not be put in the dishwasher. Instead, clean them with a damp, soapy, non-abrasive cloth and rinse thoroughly. Do not dry the inside of the Water Reservoir with a cloth, as lint may remain.