Ninja NJ600 Professional Blender

NJ600 Series

Owner’S Guide

® www.ninjakitchen.com 1 877 646-5288 Professional Blender

1 2 www.ninjakitchen.com 1-877-646-5288 20 DO NOT remove the pitcher from the motor base while the appliance is in operation. 21 To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance. 22 DO NOT expose the pitcher to extreme temperature changes. 23 DO NOT overfill. 24 DO NOT operate the appliance empty. 25 To reduce the risk of burns, always allow the appliance to cool before taking off parts and before cleaning. 26 In the event that the unit overheats, a thermal switch will become activated and shut off the motor. To reset the appliance, unplug the appliance and let it cool down for approximately 15 minutes before using again.

27 This Product Is Intended For

HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors. 28 The maximum rating is based on the Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw significantly less power or current.

Save These

Instructions

Important Safety Instructions

For Household Use Only

When Using Electrical Appliances,

Basic Safety Precautions Should

Always Be Followed, Including The

Following:

Read All Instructions Before Using

Your Ninja® Professional Blender.

Polarized Plug

WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in any way. WARNING: Extension cords are not recommended for use with this product. 9 DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect. 10 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment. 11 DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove. 12 Always use the appliance on a dry, level surface. 13 Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running. 14 Avoid contact with moving parts. 15 DO NOT attempt to sharpen blades. 16 DO NOT use the appliance if blade assembly is bent or damaged. 17 To reduce risk of injury, never place the blade assembly on base without pitcher or bowl properly attached. 18 DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven). 19 The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.

Warning:

To Reduce The Risk Of Fire, Electric

Shock Or Injury:

1 CAUTION: Blade assembly is sharp, not locked in place and removable, handle with care. When handling the blade assembly, always hold by the shaft. 2 CAUTION: Blade Assembly is not locked in place and is removable. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, ALWAYS remove the blade assembly first. 3 CAUTION: Do not blend hot liquids. 4 To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid. 5 DO NOT allow the appliance to be used by children. Close attention is necessary when used near children. This is not a toy. 6 Never leave an appliance unattended when in use. 7 Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord. 8 Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

This Book Covers Model Number:

Nj600

Nj600Rc

Technical Specifications

Voltage: 120V., 60Hz.

Power: 1000 Watts

Pitcher Capacity: 72 oz. (9 cups, 2.1 L) MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)

3 4 www.ninjakitchen.com 1-877-646-5288 Contents Thank you for purchasing the Ninja® Professional Blender. Getting Started�����������������������������������������������������������������������������������������������������������������4 Using the Ninja® Professional Blender��������������������������������������������������������������������������������5 Assembly and Use for the Blender��������������������������������������������������������������������������������������6 Care & Maintenance���������������������������������������������������������������������������������������������������������8 Replacement Parts������������������������������������������������������������������������������������������������������������8 Blending Chart������������������������������������������������������������������������������������������������������������������9 Troubleshooting Guide�������������������������������������������������������������������������������������������������������9 Warranty������������������������������������������������������������������������������������������������������������������������10 The Ninja® Professional Blender is a high powered kitchen tool that is perfect for ice crushing, blending, pureeing and controlled processing. Create all of your favorite recipes fast and easy with just one touch of a button. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Features:

Easy lock lid with built-in pour spout

Total Crushing™ Technology

Extra Large 72 oz. pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free

Easy to clean electronic control panel

Cord storage

Non Slip Bottom

Getting Started a d e f b c g h i g Motor Base h Control Panel i Non Slip Bottom j Power Cord (not shown) k Cord Storage (in back) (not shown) a Lid with Locking Handle b Locking Handle Release Button c Pouring Spout with Cap d Pitcher e Stacked Blade Assembly f Gear Shaft

5 6 www.ninjakitchen.com 1-877-646-5288 CAUTION: Stacked Blade Assembly is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold by the shaft.

Before First Use

1 Remove all packaging material and labels from the appliance. 2 Wash the lid, pitcher and Stacked Blade Assembly in warm, soapy water with a soft cloth. CAUTION: Handle the Stacked Blade Assembly with care when washing, as the blades are very sharp. 3 Rinse and dry thoroughly. 4 The pitcher, lid and Stacked Blade Assembly are all dishwasher safe. It is recommended that the lid and Stacked Blade Assembly go on the top rack. Ensure that the Stacked Blade Assembly is removed from the pitcher before placing in the dishwasher. 5 The motor base can be wiped clean with a damp cloth. Using the Ninja® Professional Blender

Please Keep These Important

Safeguards In Mind When Using The

Appliance:

WARNING: Never leave the appliance unattended while in use. WARNING: Secure the appliance while in use by pressing down on the lid with one hand. CAUTION: Stacked Blade Assembly is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold by the shaft. CAUTION: Do not blend hot liquids. CAUTION: Never remove the container while the appliance is still running.

IMPORTANT: Never add ingredients into the pitcher before placing the Stacked Blade Assembly in first.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories. CAUTION: Stacked Blade Assembly is not locked in place and is removable. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. CAUTION: Stacked Blade Assembly is not locked in place and is removable. If pouring with the lid removed, ALWAYS remove the Stacked Blade Assembly first. 1 Place the motor base on a clean, dry, level surface. 2 Lower the pitcher onto the motor base. (Fig. 1) 3 Rotate the pitcher to the left as far as it will go. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base. (Fig. 2) 4 The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b) 5 Holding the Stacked Blade Assembly by the shaft, place it onto the gear shaft inside the pitcher. (Fig. 4) Ensure that the Stacked Blade Assembly fits around the gear shaft and that the blade shaft is standing straight.

NOTE: The Stacked Blade Assembly will fit loosely on the drive gear. 6 Add the ingredients to the pitcher. Make sure your total of ingredients don't go higher than the highest measured marking line on the side of the pitcher.

NOTE: When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the “Max liquid” mark (64 oz.) on the pitcher 7 Plug the power cord into the electrical outlet.

IMPORTANT: As a safety feature, the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the ready light will be solid green, indicating that the blender is ready for use. Fig. 2 Fig. 1 Assembly and Use for the Blender Shaft Fig. 4

Assembly

Fig. 3a Fig. 3b WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

7 8 www.ninjakitchen.com 1-877-646-5288 Fig. 6 8 Holding the lid by the handle in the upright position, place it on top of the pitcher aligning the arrow ( ) located on the lid with the arrow ( ) located on the bowl’s handle. (Fig. 5) 9 Select the speed according to your blending requirements*:

Use the speed 1 button for processing and mixing.

Use the speed 2 button for blending and ice

crushing.

Use the speed 3 button for pureeing and liquifying.

Use the pulse button for controlled chopping and

processing.



See Blending Chart.

NOTE: If you need to add additional ingredients while the blender is processing, open the pouring spout cap and pour the ingredients in through the opening. 10 Press power button ( ) or the same speed button a second time to stop the Stacked Blade Assembly or press a different button to change the speed. CAUTION: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher. Assembly and Use for the Blender - cont. Fig. 5 Locking Handle Fig. 7

Use

Removal

11 To remove the pitcher, press the power button ( ) to turn the appliance 'Off'. Wait for the Stacked Blade Assembly to stop moving before removing. (Fig. 6) To remove the lid, pull the lid handle up to a 90° angle. (Fig. 7) 12 Depending on the consistency of the contents in the container, open the pouring spout cap and use the spout to empty liquid contents. For thicker consistencies, remove the lid and Stacked Blade Assembly carefully (by its shaft), then empty contents from the container. CAUTION: Stacked Blade Assembly is not locked in place and is removable. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. 13 For thicker consistencies, remove the lid and Stacked Blade Assembly carefully (by its shaft), then empty contents from the container. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle and lift the lid off the blender pitcher. CAUTION: Stacked Blade Assembly is not locked in place and is removable. If pouring with the lid removed, ALWAYS remove the Stacked Blade Assembly first. 14 Make sure that the unit is unplugged when not in use. Replacement Parts

Ordering Replacement Parts

To order additional parts and accessories, please visit our website: www.ninjakitchen.com or feel free to contact customer service at: 1-877-646-5288. Care & Maintenance

How To Clean

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any Stacked Blade Assembly and before cleaning. CAUTION: DO NOT immerse the motor base into water or any other liquid. CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp. 1 Separate/remove all parts from each other. 2 Clean the motor base with a damp cloth and wipe dry. 3 Place the Blender Pitcher in the dishwasher. Place the lid and Stacked Blade Assembly on the top rack.

Or

4 Carefully hand wash the lid, pitcher and Stacked Blade Assembly in warm, soapy water with a soft cloth.

Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288. WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

How To Store

1 Store the Ninja® Professional Blender upright with the pitcher, Stacked Blade Assembly and cover on the motor base. Do not place anything on top. 2 Tuck power cord in cord storage compartment in the back of the unit.

Resetting The Motor Thermostat

The Ninja® Professional Blender features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below: 1 Unplug the appliance from the electrical outlet. 2 Remove and empty the container and ensure that no food is jamming the Stacked Blade Assembly. 3 Allow the appliance to cool for approximately 15 minutes. 4 Re-install the container onto the base and re-plug the appliance into the electrical outlet. 5 Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

9 10 www.ninjakitchen.com 1-877-646-5288

Button

Function

Use

Power

On/Off Always turn appliance 'Off' when not in use. 1 Processing & Mixing Use to mix thin batters, gravies and marinades, scramble eggs, puree cooked foods and uncooked fruits and chop vegetables for dips and salsa. 2 Blending & Ice Crushing Use to grate hard cheeses, cream soups, beat dips, grind nuts, thorough chopping, blend sauces and spreads. Blend mixed drinks, powdered drinks or milk shakes. Crush ice cubes for snow cones, chilled beverages or frozen slushes. 3 Pureeing & Liquifying Use to mix smoothies, frappes, liquify thick mixtures and blend whole fruits and vegetables.

Pulse

Controlled Processing & Bursts of Power Use to control chopping and processing. Blending Chart

Problems

Possible Reasons & Solutions

Motor Doesn’t Start or Stacked Blade Assembly doesn't Rotate. Make sure the pitcher is securely placed on motor base. Make sure the lid is securely on pitcher in the correct position (align arrows). The blender is turned 'Off'. Press the power button ( ) to turn 'On'. Check that the plug is securely inserted into the electrical outlet. Check the fuse or circuit breaker. The unit has overheated or overleaded. Unplug and wait approximately 15 minutes before using again. Food is Unevenly Chopped. Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch. Food is Chopped Too Fine or is Too Watery. The food has been over processed. Use pulse button for controlled processing. Food Collects On Lid or On the Sides of the Pitcher. The mixture is to thick. Add more liquid. You Cannot Achieve Snow From Solid Ice. Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer. Troubleshooting Guide

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address. The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

One (1) Year Limited Warranty

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC. If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website www.ninjakitchen.com. If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.* This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province. *IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package

“Attention Customer Service”.

SharkNinja Operating LLC

Us:

Newton, MA 02459

Can:

Ville St-Laurent, QC H4S 1A7 1-877-646-5288 www.ninjakitchen.com Ninja is a registered trademark of SharkNinja Operating LLC. Total Crushing is a trademark of SharkNinja Operating LLC. Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents © 2015 SharkNinja Operating LLC NJ600_Series_30_IB_150825_1

Printed In China