Tenda A9 Wireless N300 Universal Range Extender

Led

Button Red Blinking Slowly:

Green Solid: Orange Solid: Solid: The device is starting The device is negotiating with a router/AP Detecting signal with auto-extending feature (hasn't developed yet) The device is performing WPS negotiation to a router/AP Extended successfully, the WiFi signal is strong Extended successfully, the WiFi signal is poor Extended successfully, the WiFi signal is very poor Blinking quickly: Blinking: Use the end of a paper clip or a similar object to press and hold this button for about 8 seconds, and then release it to restore the extender to factory settings. Press this button and then (within 2 minutes) press WPS button on a router/AP to establish a WPS connection.

Rst

Launch a web browser, type the default login domain name or default login IP address into the address bar, and tap on the keyboard. re.tenda.cn 192.168.0.254 Enter Extended successfully. The device is performing extending process. Wait for a moment. Select the WiFi name (SSID) you want to extend, and click Next. Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength (40%~79%

Keep the extender away from Bluetooth devices, microwave, refrigerator, etc.

to minimize

is the optimum extending location). signal interference. Select WiFi Name > Enter Password Finish Back Base Station WiFi Name: Tenda_666666 Set up the extender's WiFi name and password to the same as those of the Base Station ........ √ Install Guide Wireless N300 Universal Range Extender Model: A9 Tips Set up the extender's WiFi name and password to the same as those of the Base Station Finish. If you don't want to set up the extender's WiFi name and password to the same as those of the selected WiFi name, uncheck the option before , customize the extender's WiFi name and password, and then click

WiFi Name: Tenda_666666 WiFi Password: 00000000 WiFi Name: Tenda_666666 WiFi Password: 00000000 Poor Signal Solid Orange Internet Blinking Orange Solid Green Keep moving the extender to outlets closer to the router until the LED indicator on the extender lights solid green. Recommended extending location Extending…Please wait… Extended Successfully! The WiFi name of the extender is changed into Tenda_666666, Please connect again.

Fcc Id:V7Ta9

Ic:9034A-A9

Mac: C83A35Xxxxxx

SSID: Tenda_XXXXXX

S/N:

Wireless N300 Universal Range Extender Default Access: re.tenda.cn Power: AC100-240V 0.3A 50/60Hz Model: A9 Made in China w tendacn.com ww. Next Select WiFi Name > Enter Password Please select a WiFi name… Tenda_666666 Tenda_office Tenda_ceshi Tenda_ssid Tenda_1EEFD8 Select WiFi Name Encryption/Signal Strength New Tab re.tenda.cn Plug the extender (A9) into an electrical outlet near your wireless router. 1 Enter the WiFi password of the selected WiFi name (if any), and click Finish. 5 Relocate the extender to other electrical outlet. Observe the LED indicator on the extender to choose an optimum extended location for best WiFi performance.

8 Enjoy your WiFi! The extender's WiFi name and password are the same as those of your router. 9 Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength (40%~79%

Keep the extender away from Bluetooth devices, microwave, refrigerator, etc.

to minimize

is the optimum extending location). signal interference. WiFi Name: Tenda_666666 WiFi Password: 00000000 WiFi Name: Tenda_666666 WiFi Password: 00000000 Poor Signal Solid Orange Internet Blinking Orange Solid Green Keep moving the extender to outlets closer to the router until the LED indicator on the extender lights solid green. Recommended extending location Relocate the extender to other electrical outlet. Observe the LED indicator on the extender to choose an optimum extended location for best WiFi performance.

3 Enjoy your WiFi! The extender's WiFi name and password are the same as those of your router. 4 2 6 4 7 3 Use your computer to search and connect to the extender's WiFi. The default WiFi (SSID: Tenda_XXXXXX) is on the product label on the extender's back panel. Press the WPS button on your router, and then (within 2 minutes) press the button on the extender. When the LED indicator turns to solid green, it indicates that a successful WPS connection has been established. Press Position the antennas as shown in the figure below for best WiFi performance. Q1: I cannot log in to the extender's User Interface, what should I do? 192.168.0.254 re.tenda.cn Enter re.tenda.cn Enter Q2: What should I do if my router has no WPS button? Option 1: Use Web Browser to Extend Your WiFi

A1:

Before extending 1.Use your computer to connect to the WiFi name (SSID) on the label of the extender's back panel; 2.Launch a web browser, type or into the address bar and tap on

keyboard. After extending 1.Use your computer to connect to the extended WiFi name (if you customize the WiFi name of the extender, connect that); 2.Launch a web browser, type into the address bar and tap on the keyboard. A2: Folow to set up the extender. the

Faq

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. IC RSS warning Industry Canada(RSS-Gen Issue 4) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS- 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps

Note:

Technical Support Copyright Address Info: United States Hotline: 1-800-570-5892 Canada Hotline: 1-888-998-8966 Skype: Tendasz © 2016 Shenzhen Tenda Technology Co., Ltd. All rights reserved. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice. 6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 HongKong Hotline: 00852-81931998 Website: http:// www.tendacn.com E-mail: [email protected] Be vertical to the ground Wall Outlet Power Strip CE Mark Warning

Note:

Declaration of Conformity FCC Statement This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD., declares that the radio equipment type A9 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/page/ce.htm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful l Operate Frequency：2412-2472 MHz EIRP Power(Max.)：19.5 dBm Software Version：V12.01.01.09 interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement Use Web Browser to Extender Your WiFi Option 1: Use WPS Button to Extender Your WiFi Option 2: The LED indicator on the extender will be solid red when it is starting; and then starts blinking indicating successful start. The LED indicator on the extender will be solid red when it is starting; and then starts blinking indicating successful start. Plug the extender (A9) into an electrical outlet near your wireless router (with WPS enabled). 1 2