Honeywell Home Pro Series Thermostat

What is included in the Honeywell Home Pro Series Thermostat package?

The package includes the T6 Pro Thermostat, UWP Mounting System, Honeywell Standard Installation Adapter (J-box adapter), Decorative Cover Plate, screws and anchors, 2 AA Batteries, and Installation Instructions and User Guide. All components are provided to facilitate easy installation and setup of your thermostat.

How do I install the Honeywell Home Pro Series Thermostat with the UWP mounting system?

First, turn off power at the breaker box, then position and level the UWP on the wall, marking and drilling holes as needed. Insert wall anchors, open the UWP door, pass wires through the wiring hole, and mount the UWP securely by tightening the mounting screws. Close the door, attach the thermostat by aligning it with the UWP and pushing gently until it snaps in place, then restore power at the breaker box.

What are the temperature range settings for the Honeywell T6 Pro thermostat?

The heating temperature range is 40°F to 90°F (4.5°C to 32°C), and the cooling temperature range is 50°F to 99°F (10°C to 37°C). These ranges ensure optimal performance for both heating and cooling system operations.

What does the R Slider Tab do and how do I use it?

The R Slider Tab differentiates between one or two transformer systems. Position it up if you have one R wire connected to R, Rc, or RH terminal (single transformer), or position it down if you have two R wires—one connected to R terminal and one to Rc terminal (dual transformer).

What should I do if the display is blank or not responding?

Check the circuit breaker and reset if necessary, ensure the power switch at your heating and cooling system is on, verify the furnace door is closed securely, and confirm that fresh AA batteries are correctly installed. If the issue persists after checking these items, contact Honeywell customer support for further assistance.

What does it mean when 'Heat On' or 'Cool On' is flashing on my thermostat?

This indicates that the compressor protection feature is engaged, which enforces a 5-minute delay before restarting the system after shutdown to prevent compressor damage. You should wait 5 minutes for the system to restart safely.