GE Cafe Series Dishwasher

What should I do before using my GE Cafe dishwasher for the first time?

Before using your dishwasher, ensure it is properly installed and located according to the Installation Instructions. The dishwasher must be connected to a grounded metal permanent wiring system or have an equipment-grounding conductor connected to the appliance's grounding terminal. Read all instructions in the Owner's Manual to minimize risks of fire, explosion, electric shock, and property damage.

How do I load dishes properly in my Cafe dishwasher?

Scrape off hard soils including bones, toothpicks, skins, and seeds, and remove leafy vegetables, meat trimmings, and excessive grease or oil before loading. No pre-rinsing of normal food soil is required. Load sharp knives with handles up to reduce injury risk, and locate other sharp items so they don't damage the door seal.

What type of detergent should I use in my GE Cafe dishwasher?

Use only detergents or wetting agents specifically recommended for use in a dishwasher, such as Finish® Quantum® Automatic Dishwashing Detergent. Do not use regular detergents not designed for dishwashers, as they will cause the dishwasher to fill with suds. Keep all detergents out of reach of children.

What are the different wash cycles available on the Cafe dishwasher?

The Cafe dishwasher offers seven main cycles: Auto (1 hour 30 minutes–2 hours 1 minute), Heavy (2 hours 14 minutes for heavily soiled items), Normal (1 hour 36 minutes–1 hour 56 minutes for everyday use), Light (1 hour 46 minutes for light to medium soils), Rinse (20 minutes for partial loads), Speed Cycle (30 minutes for lightly soiled dishes), and Crystal (2 hours 14 minutes using 2-5 gallons of water). Cycle times vary based on soil level, water temperature, and options selected.

How do I use the Delay Start option on my dishwasher?

Press the Delay Start button to select the number of hours you want to delay (up to 24 hours depending on the model). The hours will display in the window or the corresponding LED will light up. To cancel Delay Start, hold the Delay Start button for three seconds to clear the delay time. Once the cycle starts, you can press Delay Start for three seconds to pause, or press Start Cancel for three seconds to begin washing.

What is the Sanitize or Wash Temp Sani option and how does it work?

The Sanitize option raises the water temperature in the final rinse to sanitize your dishware and may increase cycle time by up to 60 minutes, depending on inlet water temperature. This option is monitored for sanitization requirements and will modify the cycle to meet NSF 184 requirements for soil removal and sanitization. If the cycle is interrupted or if incoming water temperature is too low for adequate heating, sanitization conditions may not be met.