Name: Everstart Maxx BC40BE
Brand: Everstart

Question 1

What should I do if the unit does not charge the battery?

Accepted Answer

Ensure all connections are secure and check that the charger is connected correctly to a 120-volt AC power source that is functioning properly. If the battery being charged has fallen below 2 volts, it cannot be recharged with this charger. (Page 2)

Question 2

What does 'FLO' mean when it appears on the LCD screen?

Accepted Answer

FLO indicates that the unit has entered float charge mode, meaning the battery is completely charged. The battery charge gauge will point to 100%, and the clamp icon and battery icon with four bars will light solid. The arrow icons will gradually and repeatedly move downward to the battery icon.

Question 3

What happens if the alarm icon, fault icon, and battery icon all flash at the same time?

Accepted Answer

This indicates the charger has overheated or detected a ventilation issue. You should disconnect the charger, allow it to cool for several minutes, and ensure good ventilation before attempting to charge again. If the charger detects a problem with the battery, the LCD screen will display a fault indication icon and the battery should be checked by a qualified technician.

Question 4

How do I safely clean and store the Everstart Maxx BC40BE?

Accepted Answer

Before any maintenance or cleaning, unplug the battery charger from the outlet to reduce the risk of electrical discharge. Clean the cover and cables with a dry cloth or slightly damp cloth, ensuring the unit is completely disconnected from the battery and power source. Store the unit in a clean, dry, and fresh location when not in use.

Question 5

How should I store the charger's cables to maximize their lifespan?

Accepted Answer

Always roll the cables freely for storage to maintain their functioning condition and maximize their lifespan. Do not wrap the cables around the unit or compress them tightly with tape, as this can damage them over time.

Question 6

How do I use the engine start function on the BC40BE?

Accepted Answer

Press the engine start button to begin a countdown from '60' to '00,' which can be terminated by pressing the button again. When the countdown reaches '00,' a beep will sound and the engine start icon will begin flashing, indicating the vehicle is ready to start. Turn on the engine per the manufacturer's instructions, typically in 3-5 second intervals, and the digital screen will display a 5-second countdown.

Question 7

What warranty does the Everstart Maxx BC40BE come with, and what is not covered?

Accepted Answer

The BC40BE comes with a limited two-year warranty against defects in materials and workmanship from the date of purchase. The warranty does not cover accessories, bulbs, fuses, and batteries; defects due to normal wear; accidents; damage during shipping and handling; unauthorized alterations or repairs; negligence; abuse; or failure to follow care and maintenance instructions. Defective products within the warranty period can be returned to the manufacturer for repair or replacement, or exchanged at a participating retailer.

Question 8

What does the error code F04 mean on the LCD screen?

Accepted Answer

The F04 code means the battery has not reached a full charge after 18 hours of continuous charging, which may indicate internal battery damage that prevents it from accepting a charge. You should disconnect the charger and have the battery checked by a qualified technician. After 18 hours, the charging process will automatically cut off. (Page 2)

Question 9

What does 'FLO' displayed on the LCD screen mean?

Accepted Answer

FLO indicates that the unit is in float charge mode, meaning the battery is completely charged and the unit has automatically switched to maintain the charge. The battery charge gauge will point to 100%, and the clamp icon and battery icon with four bars will light solid. (Page 2)

Question 10

How do I stop the charging process at any time?

Accepted Answer

Press and hold the charge/voltage button for three seconds to return the unit to Standby Mode. When disconnecting the charger, disconnect the AC cord first, remove the clamp from the vehicle chassis, and then remove the clamp from the battery terminal. (Page 2)

Question 11

What happens when the alarm icon, fault icon, and battery icon all flash at the same time?

Accepted Answer

This indicates the charger may have overheated or detected a ventilation issue. Disconnect the charger, allow it to cool for several minutes, and ensure good ventilation before attempting to charge again. (Page 2)

Question 12

How does the engine start function work on the BC40BE?

Accepted Answer

Press the engine start button to begin a countdown from 60 to 00, and when it reaches 00, a beep will sound and the engine start icon will begin flashing, indicating the vehicle is ready to start. Turn on the engine per the manufacturer's instructions, typically in 3-5 second intervals, and the digital screen will display a 5-second countdown. After starting, the unit automatically adjusts the charging current to 3A for 5 minutes before switching to charge mode. (Page 2)

Question 13

How do I properly clean and store the BC40BE?

Accepted Answer

Store the unit in a clean, dry, and fresh location when not in use, and clean the cover and cables with a dry cloth or a slightly damp cloth. Ensure the unit is completely disconnected from the battery and power source before cleaning. Always roll the cables freely for storage and do not wrap them around the unit or compress them tightly with tape. (Page 2)

Question 14

What safety precaution should I take before performing any maintenance or cleaning?

Accepted Answer

Unplug the battery charger from the outlet before performing any maintenance or cleaning tasks to reduce the risk of electrical discharge. Turning off the controls will not reduce this risk, so physical disconnection from the power source is required. (Page 2)

Question 15

How do I test the alternator using the BC40BE?

Accepted Answer

The alternator must be fully charged before testing — run the engine until it reaches normal idle speed, then press the alternator check button to start the test. If the unit detects good alternator function, the screen will display 'Good'; if not, it will show a flashing fault icon with the alternator symbol. Press the alternator check button again to stop the test. (Page 2)

Question 16

What warranty does the BC40BE come with, and what is not covered?

Accepted Answer

The BC40BE comes with a limited two-year warranty against defects in materials and workmanship from the date of purchase. The warranty does not cover accessories, bulbs, fuses, batteries, normal wear and tear, accidents, damage during shipping, unauthorized repairs or modifications, negligence, abuse, or failure to follow care and maintenance instructions. Defective products within the warranty period can be returned to the manufacturer for repair or replacement, or exchanged at a participating retailer. (Page 2)

Question 17

What are the basic setup instructions for the EverStart Maxx BC40BE battery charger?

Accepted Answer

Place the charger on a stable, dry surface away from flammable materials. Attach the red (positive) clamp to the positive terminal of the battery and the black (negative) clamp to a metal part of the vehicle's chassis, away from the battery and fuel system. Then plug the charger into a standard 120V AC outlet and use the Charge/Voltage button to select your desired mode.

Question 18

How do I use the engine start function on the EverStart Maxx BC40BE?

Accepted Answer

Press the Engine Start button to initiate the 40 Amp engine start function, and the LCD will display a countdown from 60 seconds. Once the countdown reaches zero, start the vehicle in 3 to 5-second bursts following the manufacturer's guidelines. After starting, the charger will automatically adjust the charging current to 3A for 5 minutes before returning to normal charging mode.

Question 19

What should I do if the EverStart Maxx battery charger is overheating?

Accepted Answer

If the Overheat Alarm Icon appears on the display, unplug the charger immediately and allow it to cool down before resuming use. Do not attempt to use the charger while the overheat alarm is active.

Question 20

Why is my EverStart Maxx BC40BE charger not charging the battery?

Accepted Answer

First, verify that all connections are secure and correctly attached (red clamp to positive terminal, black clamp to chassis). Confirm that the battery voltage is above 2V; batteries below this voltage may not be chargeable with this charger. If connections are correct and the battery voltage is adequate, the battery may be defective.

Question 21

How does the alternator check feature work on the EverStart Maxx?

Accepted Answer

Press the Alternator Check button to begin testing, and the LCD will display "Check" along with the alternator icon. If the alternator is functioning correctly, "Good" will appear on the display. If the alternator is out of the typical voltage range, a fault icon will flash, indicating a problem.

Question 22

What is the battery reconditioning feature and how do I use it?

Accepted Answer

The battery reconditioning feature helps restore battery capacity and extend battery life. Press the Battery Recondition button to start the process, and the LCD will display the reconditioning status. Use this feature as needed, especially if you notice reduced battery performance.

Question 23

What are the power specifications for the EverStart Maxx BC40BE?

Accepted Answer

The EverStart Maxx BC40BE requires 120V AC, 60Hz input with 245W power consumption. Its output is 12V DC at 15A charging current, with a 40 Amp engine start function that operates for 5 seconds on and 5 minutes off.

Question 24

Why won't the EverStart Maxx BC40BE charger power on?

Accepted Answer

Ensure the charger is properly plugged into a functioning 120V AC outlet. Check for any visible damage to the power cord or plug that may prevent proper power connection.

Question 25

Can I use the EverStart Maxx BC40BE on 6V batteries or other battery types?

Accepted Answer

No, this charger is designed exclusively for 12V batteries only. It cannot be used for 6V batteries or other voltage systems.

Question 26

What safety precautions should I take when using the EverStart Maxx battery charger?

Accepted Answer

Avoid using the charger in damp or wet locations, keep it away from children, and store it indoors in a dry place when not in use. Do not abuse the power cord by carrying the charger by the cord or yanking it to disconnect, and keep the cord away from heat, oil, and sharp edges. Always use a grounded outlet and avoid extension cords.

Question 27

What type of outlet do I need to plug in the Everstart Maxx BC40BE?

Accepted Answer

You need to plug the charger into a standard 120V AC outlet. Make sure to use a grounded outlet and avoid using extension cords to prevent potential hazards.

Question 28

My charger won't power on. What should I check?

Accepted Answer

First, ensure the charger is properly plugged into a functioning 120V AC outlet. Then check for any visible damage to the power cord or plug. If you find damage, do not use the charger and contact customer service.

Question 29

What should I do if the charger starts overheating?

Accepted Answer

If the Overheat Alarm Icon appears on the LCD display, unplug the charger immediately and allow it to cool down before resuming use. Do not attempt to use it while it is overheating.

Question 30

What does it mean if the Fault Icon flashes during Alternator Check?

Accepted Answer

A flashing Fault Icon during the Alternator Check indicates that the alternator is out of the typical voltage range and may need service or replacement. Press the Alternator Check button again to stop the test.

Question 31

Can I use this charger on 6V batteries?

Accepted Answer

No, the Everstart Maxx BC40BE is designed exclusively for 12V batteries. It will not work with 6V battery systems.

Question 32

My charger isn't charging the battery. What could be wrong?

Accepted Answer

Verify that all connections are secure and correctly attached to the battery terminals. Also confirm that the battery voltage is above 2V; batteries below this voltage may not be chargeable with this charger.

Question 33

Where should I store the charger when not in use?

Accepted Answer

Store the charger indoors in a dry place when not in use, and always unplug it from the outlet. Keep it away from damp or wet locations and ensure it is stored in a safe location away from children.

Question 34

How do I properly connect the battery clamps?

Accepted Answer

Attach the red (positive) clamp to the positive terminal of the battery, then attach the black (negative) clamp to a metal part of the vehicle's chassis, away from the battery and fuel system. Ensure all connections are secure before powering on.

Question 35

How often should I use the battery reconditioning feature?

Accepted Answer

Use the reconditioning feature as needed to restore battery capacity, especially if you notice reduced battery performance. There is no set schedule; it depends on your battery's condition and usage patterns.

Question 36

How does the Engine Start function work?

Accepted Answer

Press the Engine Start button to initiate the 40 Amp engine start function. The LCD will display a countdown from 60 seconds, and once it reaches zero, your vehicle is ready to start. Start the vehicle in 3 to 5-second bursts following the manufacturer's guidelines. After starting, the charger will automatically adjust to 3A charging for 5 minutes before returning to normal mode.

Question 37

Why isn't my charger powering on?

Accepted Answer

Ensure the charger is properly plugged into a functioning 120V AC outlet. Check the power cord and plug for any visible damage, as a damaged cord may prevent the charger from powering on.

Question 38

How do I connect the charger to my battery?

Accepted Answer

Attach the red (positive) clamp to the positive terminal of the battery, then attach the black (negative) clamp to a metal part of the vehicle's chassis, away from the battery and fuel system. This connection method ensures safe and proper charging.

Question 39

What is the warranty coverage for the Everstart Maxx BC40BE?

Accepted Answer

The Everstart Maxx BC40BE comes with a two-year limited warranty covering defects in materials and workmanship. For warranty claims, contact customer service at 1-877-571-2391.

Question 40

What should I do if my charger is overheating?

Accepted Answer

If the Overheat Alarm Icon appears on the display, unplug the charger immediately and allow it to cool down before resuming use. Do not attempt to use the charger while it is overheating.

Question 41

Can I use an extension cord with this charger?

Accepted Answer

No, you should use a grounded outlet and avoid using extension cords to prevent potential hazards. The safety guidelines specifically recommend against extension cord use.

Question 42

What voltage battery does the Everstart Maxx BC40BE charge?

Accepted Answer

The Everstart Maxx BC40BE is designed exclusively for 12V batteries. It cannot be used for 6V batteries or other voltage systems.

Question 43

What is the minimum battery voltage required for charging?

Accepted Answer

The battery voltage must be above 2V for the charger to work. Batteries below 2V may not be chargeable with this charger and should not be used.

Question 44

What does it mean if a fault icon flashes during the alternator check?

Accepted Answer

A flashing fault icon during alternator check indicates that the alternator is out of the typical voltage range and may not be functioning properly. Press the Alternator Check button again to stop the test.

Everstart Maxx BC40BE

Ask AI

Common Questions

More from Everstart

Similar Battery Chargers