Name: Whirlpool Dishwasher Filter Assembly
Brand: Whirlpool

Question 1

How often should I clean the dishwasher filters?

Accepted Answer

You should clean both your upper and lower filters and rinse them under running water at least once a month. Additionally, the dishwasher itself should be cleaned approximately every 30 days for optimal performance.

Question 2

What are the signs that my filter needs cleaning?

Accepted Answer

The filters may need to be cleaned when there are visible objects or soils on the Upper Filter Assembly, there is degradation in cleaning performance with soils still present on dishes, dishes feel gritty to the touch, or there is smell or odors coming from the dishwasher.

Question 3

Do I need to hand wash my dishes before putting them in the dishwasher?

Accepted Answer

No, you do not need to hand wash your dishes before placing them in the dishwasher. The best way to prepare dishes is to simply scrape large food particles off them and then load them into the dishwasher. Hand washing dishes before dishwasher use can cause white etching on your dishes over time, which is permanent and cannot be removed.

Question 4

How do I clean Filter Style 1?

Accepted Answer

Turn the upper filter assembly ¼ turn counterclockwise and lift out, then gently pull apart to separate the upper filter assembly. Rinse the filter under running water until most soils are removed, using a soft brush if necessary for hard-to-remove soils or calcium deposits. Then reinstall the filter.

Question 5

What is the foreign object cup and how do I maintain it?

Accepted Answer

The foreign object cup is located in the front and below the lower rack and protects the pump from large objects entering it. If the cup fills up with particles or objects, depress the tab in the center and pull up on the cup to remove it, dispose of the contents, and then replace the cup by pushing it down to lock in place.

Question 6

What is Filter Style 2?

Accepted Answer

Filter Style 2 is a maintenance-free filter system that does not require any regular cleaning or maintenance. It only requires maintenance of the foreign object cup when it fills up with particles or objects.

Question 7

What happens if I operate the dishwasher without properly installing the filters?

Accepted Answer

Operating the dishwasher without properly installing the filters can cause damage to the dishwasher. Be sure the lower filter is securely in place and the upper filter assembly is locked into place—if the upper assembly turns freely, it is not locked into place.

Question 8

How do I reset the Clean Filter indicator?

Accepted Answer

To reset the Clean Filter status indicator, first clean and replace the filter, then hold the "Clean Filter" button for 3 seconds, and finally open and close the dishwasher door.

Question 9

What should I do if my dishes feel gritty after washing?

Accepted Answer

Dishes feeling gritty to the touch is a sign that the filters need cleaning. Clean both your upper and lower filters by rinsing them under running water, using a soft brush if necessary for hard-to-remove soils or calcium deposits.

Question 10

What should I do with a partially full load of dishes?

Accepted Answer

If you do not have a full load or do not want to run the dishwasher immediately, run a "Rinse and Hold" or "Rinse Only" cycle (on some models) without detergent to keep the dishes moist and eliminate odor build-up. Run this cycle every 24 hours until you have a full load, and then run a complete cycle.

Question 11

Can I operate my dishwasher without the filters installed?

Accepted Answer

No, you should not operate the dishwasher without properly installing the filters. To prevent damage to the dishwasher, be sure the lower filter is securely in place and the upper filter assembly is locked into place. If the upper assembly turns freely, it is not locked into place.

Question 12

How do I reset the 'Clean Filter' indicator on my dishwasher?

Accepted Answer

First, clean and replace the filter. Then hold the 'Clean Filter' button for 3 seconds, and finally open and close the dishwasher door to reset the indicator.

Question 13

What are the signs that my dishwasher filter needs cleaning?

Accepted Answer

The filter may need cleaning when you notice visible objects or soils on the upper filter assembly, degradation in cleaning performance with soils still present on dishes, dishes that feel gritty to the touch, or smell or odors coming from the dishwasher.

Question 14

Do I need to hand wash or rinse my dishes before loading them in the dishwasher?

Accepted Answer

No, you do not need to hand wash or rinse your dishes before putting them in the dishwasher. The best way to prepare your dishes is to simply scrape large food particles off them before loading. Hand washing dishes before dishwasher use can cause white etching on dishes over time, which is permanent and cannot be removed.

Question 15

How do I remove the foreign object cup from Filter Style 2?

Accepted Answer

Depress the tab in the center of the foreign object cup and pull up on the cup to remove it. Dispose of the contents and then replace the cup by putting it into the opening and pushing down to lock it in place.

Question 16

How do I clean a Filter Style 1 assembly?

Accepted Answer

Turn the upper filter assembly ¼ turn counterclockwise and lift it out, then gently pull apart the upper filter assembly. Rinse the filter under running water until most soils are removed, using a soft brush if needed for hard-to-remove soils or calcium deposits from hard water. Finally, reinstall the filter.

Question 17

What should I do if my dishes feel gritty or smell bad after running a cycle?

Accepted Answer

These are signs that your filter needs cleaning. Clean both your upper and lower filters by rinsing them under running water. If the problem persists, consider using affresh® Dishwasher Cleaner monthly to clean the interior and eliminate odor build-up from the tub, pump, valves, drain, and recirculation hoses.

Question 18

How often should I clean the filters in my Whirlpool dishwasher?

Accepted Answer

You should clean both your upper and lower filters and rinse them under running water at least once a month to maintain peak cleaning performance. Additionally, dishwashers should be cleaned approximately every 30 days for optimal performance using affresh® Dishwasher Cleaner to prevent filming, spotting, and odors.

Question 19

What is the difference between Filter Style 1 and Filter Style 2?

Accepted Answer

Filter Style 1 requires regular cleaning and maintenance at least monthly. Filter Style 2 is a maintenance-free filter system that does not require regular cleaning, but has a foreign object cup in front and below the lower rack that should be emptied when full by depressing the tab and pulling up.

Question 20

What should I do if I don't have a full load of dishes?

Accepted Answer

Run a 'Rinse and Hold' or 'Rinse Only' cycle (on some models) without detergent to keep the dishes moist and eliminate odor build-up. Repeat this cycle every 24 hours until you have a full load, then run a complete wash cycle.

Question 21

How do I know if my upper filter assembly is properly locked in place?

Accepted Answer

If the upper assembly turns freely, it is not locked into place. You must ensure it is locked properly to prevent damage to the dishwasher. (Page 2)

Question 22

What is Filter Style 2 and does it require regular cleaning?

Accepted Answer

Filter Style 2 is a maintenance-free filter system that does not require any regular cleaning or maintenance. However, if the foreign object cup in front and below the lower rack fills up with particles or objects, you should depress the tab in the center and pull up on the cup to remove and dispose of the contents. (Page 3)

Question 23

Why should I use affresh® Dishwasher Cleaner?

Accepted Answer

Using affresh® Dishwasher Cleaner every month will help keep your dishwasher from filming and spotting and keep the interior clean and free of odors. It cleans deep inside your appliances reaching components such as the tub, racks, pump, valves, drain, and recirculation hoses. (Page 3)

Question 24

How often should I clean my dishwasher filters?

Accepted Answer

You should clean both your upper and lower filters and rinse them under running water at least once a month to maintain peak cleaning performance. Additionally, your dishwasher should be cleaned approximately every 30 days for optimal performance. (Page 2)

Question 25

Do I need to pre-wash or rinse my dishes before putting them in the dishwasher?

Accepted Answer

No, it is not necessary to wash or even rinse your dishes before putting them in the dishwasher. The best way to prepare your dishes is to simply scrape large food particles off them before loading them. (Page 2)

Whirlpool Dishwasher Filter Assembly

Ask AI

Common Questions

Full Manual

More from Whirlpool

Similar Dishwashers