Washing Machines Error Codes
282 error codes across 14 brands. Find your code, what it means, and how to fix it.
Whirlpool
76 codesWater supply error detected. No adequate water flow to inlet valve.
Motor is having difficulty turning the washer drum.
Washer door will not lock. Door lock mechanism failure detected.
Load detected in drum during Clean Washer with affresh cycle operation.
Water Inlet Problem — no water or insufficient water supply to the washer.
Drain Problem — water is not draining from the washer properly.
Appliance control fault — internal control unit has failed.
Clean Washer reminder — the washer has completed 30 wash cycles and is reminding the user to run the Clean Washer cycle.
Dispenser cartridge is not detected by the washer.
Door/Lid cannot lock. The lid is not locked, possibly due to items caught in the lid keeping it from closing.
Drain pump system problem — washer is taking too long to drain water.
Drain pump system problem — washer is taking too long to drain water.
Door/Lid cannot unlock. Excessive weight on the lid prevents it from unlocking.
System error code. An unspecified system error has occurred.
Water supply issue — water is not entering the washer properly.
Drainage problem — water is not draining from the washer.
Overload detected — the washer has too much laundry for the cycle.
Machine displays an error code on the control panel.
Other fault codes (F codes other than F20, F21, or F22) indicate various system errors.
Washer Problem — a variable fault code indicating a general washer malfunction or sensor error.
Generic fault code (represented as F## with numbers). Indicates a service fault has been detected.
System error code — a system error other than those specifically described has been detected.
Lid Lock Error — check if the lid is closed properly.
Lid Lock Error indicating the lid is not closed properly.
Electrical Problem — one of a range of electrical faults detected in the washer system.
Drain error — drain times are longer than expected, indicating a drainage problem with the washer.
Door lock error — the washer door will not lock.
Motor drive error — the motor is having difficulty turning the drum.
Water supply error — water is not properly flowing to the inlet valve.
Drain pump system error — the washer is unable to drain properly.
Excessive suds error — detergent is producing too much foam during the wash cycle.
Water supply issue — water is not filling the washer properly.
ACU failure — internal appliance control unit has failed.
Drainage problem — water is not draining from the washer.
Water inlet problem — no water or insufficient water supply to the washer.
Drain error — drain times are longer than expected, indicating a drainage problem with the washer.
Front door lock error — washer door is not properly closed or locked.
UI/ACU mismatch — user interface and control unit initialization error.
UI/ACU mismatch — wrong control unit or user interface has been installed.
Temperature sensor error — the temperature sensor is not functioning properly.
Water level sensing failure — pressure sensor on ACU has failed.
Door lock malfunction — the washer door is not locking or unlocking properly.
Door Lock Error – inspect the door lock mechanism.
Door Lock Error indicating a problem with the door lock mechanism.
Lid lock failure — lid will not lock properly.
Door lock error — the washer door lock mechanism is not functioning properly.
Communication error — UI cannot communicate with ACU.
Communication error — UI cannot communicate with ACU.
Motor Speed Error – ensure the washer is not overloaded.
Basket speed fault — the main control cannot determine the speed of the basket or the speed changes too quickly.
Long fill error — washer is taking too long to fill with water.
Lid opened error — washer lid has been left open.
Drain pump system problem — washer is taking too long to drain water.
Drain pump system error. Water is not draining properly from the washer.
Cold and hot water inlet hoses are switched. This code appears at the end of the wash cycle to indicate reversed water inlet hoses.
Interrupted cycle — the cycle was paused or cancelled by the user.
Cycle was paused or cancelled during operation.
Long Drain — indicates a drainage issue with the washer.
Washer may be improperly leveled or installed on a soft/flexible surface such as carpet resulting in excessive vibration.
Long fill error — washer is taking too long to fill with water.
Lid is open. The washer will not operate with the lid open.
The washer lid lock is not functioning properly or the lid cannot be unlocked.
Off balance error — load is not balanced or evenly distributed around the basket.
Overload detected. The washer has attempted to fill and begin the wash cycle but is overloaded and will drain the water and detergent.
Remove load detected — items are detected in the washer drum during the Clean Washer with affresh® cycle.
Excessive suds detected. The washer displays this code while running a suds reduction correction routine at the end of the wash cycle to remove extra suds.
Excess suds detected in washer during cycle. The washer is running a suds reduction routine to remove excessive foam.
Unbalanced load detected. The washer displays this code while running an imbalanced load correction routine at the end of the wash cycle and before the final spin.
Beep alert — washer emits beep when START button is touched because the door is not completely closed.
Beep sounds when START button is touched.
A leak can be caused by household plumbing issues or loose connections in the washer's inlet pipes.
Issues with washer making noises or vibrations can indicate improper installation, unbalanced loads or a faulty part.
Error beeps — washer emits error beep pattern, indicating the door has not been opened and closed for at least 3 cycles.
Washer beeping error notification. Three beeps indicate door issue.
Cannot properly drain water during operation; this could be due to kinking, freezing, clogging or improper height placement of the hose.
The washer might not be receiving adequate power or the door may have been accidentally left open between uses.
Samsung
46 codesCalibration complete — the washer has successfully completed the calibration cycle and is ready for use.
Water Level sensor is not working properly. The washing machine will drain for 3 minutes and the Power button is inoperative during this time.
The Water Level sensor is not working properly. The sensor cannot accurately detect water levels in the tub.
Motor operation check required.
A motor problem. The washer motor is not functioning properly.
Water is not being supplied to the washing machine. The washing machine will drain for 3 minutes and the Power button is inoperative during this time.
Cold water supply hose connection issue, potentially connected to hot water tap instead.
Your washer has tried to fill but was unsuccessful. The washer cannot properly supply water to the tub.
The hot/cold water hose connection is not correct. The inlet hoses are not properly connected to their corresponding water supply lines.
Water is not draining from the washing machine.
Your washer is not draining. This can also mean that the unit senses a small clog while draining.
MEMS sensor check required.
A MEMS sensor problem. The micro-electromechanical systems sensor is not functioning properly.
The electronic control needs to be checked due to Over Voltage Error.
Low voltage detected in the washing machine.
High voltage detected. The washer is receiving abnormally high electrical voltage.
Low voltage detected. The washer is receiving abnormally low electrical voltage.
Check communications between main and sub PBAs — communication error between control boards.
Inverter Communication problem between the control module and inverter.
A Communication error between the SUB (Sensor) PBA and the MAIN PBA. The circuit boards cannot communicate properly.
A Communication error between the MAIN PBA and the INVERTER PBA. The main control board and inverter are not communicating.
A jammed key. One of the control panel buttons is stuck or not responding properly.
Calibration mode — the washer is in calibration mode to ensure accurate weight detection.
The washing machine's lid is not properly closed.
The washing machine's lid is not properly closed.
The door is open when the washer is running. The washer has detected that the door is not properly closed during operation.
Your washer failed to lock or unlock the door. The door locking mechanism is not functioning properly.
ECO TUB CLEAN reminder - the tub needs to be cleaned. The indicator blinks after washing is complete for 6 consecutive cycles.
High temperature heating check required.
A water temperature control problem indicating heater control failure. The washer cannot maintain proper water temperature.
Drain hose positioning issue. The washing machine will drain for 3 minutes and the Power button is inoperative during this time.
Check the drain hose — drain hose configuration error requiring verification.
Your washer has tried to fill, but has not reached the proper water level. The water level sensor detected insufficient water in the tub.
Low voltage error — power supply voltage is below acceptable level.
Water has overflowed in the washing machine.
A fault is detected in the water level sensor. The sensor is not functioning properly.
Position of the clutch cannot be detected.
After position of the clutch is detected, the signal of the clutch hall goes wrong.
A system error. The washer has detected an unspecified system fault.
A system error. The washer has detected an unspecified system fault.
A system error. The washer has detected an unspecified system fault.
Too many suds are detected during the wash session. The unit is put on hold until the amount of suds have been reduced.
A temperature sensor problem. The temperature sensor is not functioning correctly.
Spinning does not work - unbalanced load detected.
The electronic control needs to be checked — Over Voltage Error detected.
Unbalanced load prevented your washer from spinning. The drum detected an uneven distribution of clothes during the spin cycle.
Maytag
38 codesAn object detected in the drum during a cleaning cycle (such as Clean Washer with affresh®).
Indicates that a cycle has been paused or cancelled, resulting in current status until system stabilizes.
Low airflow condition — lint screen or vent is clogged, or vent system has issues restricting proper air circulation.
The lint screen or vent is clogged; the vent is crushed, kinked, or has too many turns.
Clean Washer indicator light flashes to remind user to run the Clean Washer cycle.
Detergent dispenser cartridge is not detected by the washer.
Variable service codes (e.g., F1 E1, F3 E1, etc.) — the dryer control has detected a problem that requires service.
Variable service codes (e.g., F1 E1, F3 E1, etc.) — the dryer control has detected a problem that requires service.
System error code (any F## E## code not described above) appears in display.
Door will not lock appears in display.
Door locking mechanism is malfunctioning.
Motor drive error appears in display.
Water supply error appears in display.
Water supply issue; the inlet valve screens might be clogged.
Drain pump system error appears in display.
Drainage problem; clogged or improperly installed drain hose.
Lid Lock Error — the lid is not properly closed or the lid lock mechanism is not functioning.
Door lock issue — the door lock mechanism is malfunctioning, preventing the washer from starting or completing cycles.
Door will not lock — washer door is not locking properly.
Motor Error — the motor is not functioning correctly or the washer is overloaded.
Water Inlet Error — water is not entering the washer properly.
Drain pump system error — washer is not draining water properly.
Interrupted - the cycle was paused or cancelled.
Low or no line voltage condition — there may be a problem with the home power supply, keeping the dryer's heater from turning on.
Low or no line voltage condition — there may be a problem with the home power supply, keeping the dryer's heater from turning on.
Control Lock is enabled — the dryer controls are locked to prevent accidental changes.
Indicates a problem with the locking mechanism of the door during use.
Indicates the need to periodically run a maintenance program such as 'Clean Washer' to avoid buildup.
Indicates potential problems with the water supply line or connections.
Control Lock is enabled — the dryer controls are locked to prevent accidental changes.
Drain error — water is not draining from the unit.
Power failure — the drying cycle has been interrupted by a power failure.
Remove load — load detected in drum during Clean Washer with affresh cycle.
Excess suds detected in washer. Washer is running a suds reduction routine.
High amount of foam detected in the washer, likely due to incorrect detergent usage.
Three clicking sounds heard after START/PAUSE button is pressed during door lock/unlock cycle.
Washer sounds a beep when START/PAUSE button is pressed, indicating door is not fully closed.
Washer is sounding error beeps, typically indicating door has not been opened and closed for at least 3 cycles.
LG
35 codesUnbalanced load detected during spin cycle.
Washing cycle has been completed successfully.
Problem of overfilling water detected.
Door is not closed properly.
Child lock is activated and displayed on control panel.
Control Lock activated — the control panel is locked to prevent accidental operation.
Lid is not closed properly, preventing the wash cycle from starting.
Lid lock error indicating a malfunction with the lid locking mechanism.
The door is not properly closed or locked, preventing the washing cycle from starting or continuing.
The drain pump filter is clogged with threads, lint, or small objects, restricting water drainage.
Water is not draining properly from the washing machine, indicating a drainage system malfunction.
The drying heater or thermostat has malfunctioned.
Water supply issue — water is not filling the washing machine properly.
Drainage problem — water is not draining from the washing machine.
Unbalanced load detected — laundry is not distributed evenly in the drum.
Door not properly closed — the door latch is not engaged.
The washing machine has detected an imbalance in the load during the spin cycle.
Motor error — the direct drive motor has malfunctioned.
Foreign object error indicating a foreign object has been detected in the tub.
Drainage error — water is not draining from the washer properly.
The motor is experiencing excessive load or strain, indicating it cannot handle the current washing conditions.
Motor has detected excessive load during wash cycle.
The washing machine has detected that water is overfilling beyond normal levels.
The washing machine is detecting that water level has exceeded the maximum safe level in the drum.
Tub clean alarm indicating it is time to run the Tub Clean maintenance cycle.
The power supply was interrupted during operation.
Unbalanced load error — laundry is not evenly distributed in the drum.
Out-of-balance load detected, the washer will attempt to automatically redistribute the load.
The washing machine has detected that the laundry load is unevenly distributed in the drum.
The inlet hose filter is clogged, restricting water flow into the detergent drawer or washing drum.
The water inlet system is not functioning properly, preventing water from entering the machine.
The washing machine cannot sense or measure the water pressure correctly, indicating a malfunction in the pressure sensor.
The washing machine detects an error in sensing water pressure.
The washing machine cannot achieve or maintain the selected water temperature.
The washing machine has detected a problem with the water temperature system.
Bosch
24 codesRinse stop setting selected — final spin cycle will not be executed and water will remain with laundry.
Water is not flowing into the washing machine.
The water is not being drained from the washing machine.
Time display showing 0:00 indicates wrinkle guard process is running.
Appliance is ready or paused and waiting for user input.
Appliance is currently running a programme.
Too much foam detected — additional rinse cycle has been added.
Drain pump blocked — water is not draining from the unit properly.
Unbalance problem — spinning phase is aborted and alternates with End display when programme is finished.
No water detected in drying phase — may result in poor drying result.
Water inlet issue — water is not entering the machine properly.
Drainage problem — water is not draining from the machine.
Unbalanced load — laundry is not distributed evenly in the drum.
The door cannot be opened after the drying programme due to high temperature inside.
Finish in time function has been selected.
Wrinkle guard process is running after drying to prevent laundry wrinkling.
The door was opened and the water level is too high.
The door lock temperature is too high to open the door.
The door is not closed properly when attempting to start the programme.
Door is locked during programme operation.
No water supply — tap turned on or water inlet filter is blocked.
Low water pressure detected — for information only, does not affect programme progress.
Childproof lock is active and the programme selector has been adjusted.
Childproof lock is activated and prevents programme changes.
Hoover
19 codesDoor safety system is active, indicating door not fully closed.
No water — inlet hose closed.
The machine cannot drain water.
Water leak — detected by water-leak detection sensor under spray arm nozzle and wash basket. May occur when the machine cannot be drained.
Electronic control fault — detected during wash or drain cycle, often caused by issues in the electronics board.
Filter clog or issue with water heating element.
Electrical control fault — detected during wash or drain cycle; similar to E5 but different underlying issue can occur in various electrical faults.
Electronic control fault — detected during wash or drain cycle; various issues can cause this.
Implies a fault with the water heating element or clogged filter plate, disrupting temperature regulation and washing efficiency.
Possible electronic control fault or unrecognized error.
Indicates fault in the electronics or software of the dishwashing system leading to improper operation or malfunctioning of control modules.
Another indication of fault with water heating element similar to E8 but can also refer to malfunction in filter plate.
The washing machine does not load water.
The washing machine does not properly drain water.
The washing machine is overloaded with fabric.
The program is paused for a short cooldown period.
Water inlet tap turned off — indicates that the machine is unable to draw water for washing, often due to disconnected or closed taps.
Filter or drain hose clogging prevents proper drainage.
Overheating warning — internal temperature too high.
Electrolux
11 codesFault with door aperture 'sensing' circuit causing issues in identifying a closed door properly.
Fault in motor power triac short-circuiting.
No signal received from motor tachometric generator during operation.
Fault indicates leakage in washing element during heating process.
The NTC sensor is wrongly positioned inside the machine, leading to misreading of temperature data.
Incorrect machine configuration based on user settings or programming errors.
Machine detects mains voltage too low, affecting performance or safe operation.
Configuration error detected — incorrect settings.
Overheating detected — internal temperature too high.
Drain error — water is not draining from the unit.
Configuration error — user interface not configured correctly.
Indesit
10 codesPossible issue with programme times due to water pressure or temperature, balance issues.
Machine not draining properly, potentially due to pump filter blockage or drain issues.
The machine continuously fills with water and continually drains away, or stuck on wash, or the machine does not drain or spin.
Washing machine is stuck during the wash cycle.
Machine’s door lock mechanism may not be releasing properly.
Washing machine does not spin properly.
Normal presence of drainage holes on door seal, not a defect.
Machine is in a steady cycle state (possibly post-program end or standby).
The machine does not fill with water or the indicator light for the first wash cycle stage flashes rapidly.
Washing machine continuously fills with water and drains away.
Highone
8 codesWarning signal — indicates an issue needs immediate attention; typically a safety protocol.
Standing drain — the water cannot finish draining within 7 minutes due to a blocked or wrongly placed drain hose.
Spin issue — conflict between the tub and cabinet during spinning.
Insufficient water supply — water fails to reach desired level within time limit.
Abnormal water level sensor — sensing failure due to electrical issues or damage.
Unable to stop filling or draining — typically a result of internal circuit board (PCB) defects or valves/sensors not working well.
Storage fault — internal memory chip failure leads to inaccessibility issues.
Overheating detected — internal temperature too high, posing a risk to machine integrity.